XL

You are here:Home > Filters > Size > XL

We found 43 results matching your criteria.

Sort By:

Page of 2


Viktos Live Ball Our Price: $13.99	Viktos Norskerator Tee Our Price: $29.99	Viktos Breacher Tee Our Price: $29.99

.	.	.


Viktos Live Ball Tee Our Price: $29.99	Viktos Sundowner Tee Our Price: $29.99	Viktos Forbidden Fruit Tee Our Price: $29.99

.	.	.


Viktos Forbidden Waingro Tee Our Price: $29.99	Viktos Operatus Glove Greyman Our Price: $39.99	Vertx Full Guard Performance Short Sleeve Shirt Our Price: $59.99 Sale Price: $39.99 You save $20.00!

.	.	Microclimate Management in Motion Every operator needs a baselayer they can depend on to perform in any condition. Constructed using VaporCore™, powered by 37.5® technology, the short sleeve Full Guard Performance Shirt provides unmatched moisture and heat management no matter the environment. Whether you’re putting in work at the range or in the gym the shirt’s raglan style sleeve, semi-compression fit and long-line hem ensure maximum mobility and coverage while on the move. Built for the Prepared Professional™, the Full Guard Performance Shirt is more than the average baselayer. Features: Semi-compression fit comfortably skims the body without squeezing Longline hem stays tucked in during every activity level Raglan style sleeves reduce shoulder restriction for added comfort and mobility Easily layers under low-profile or overt pieces to increase performance in the field Gusseted underarm provides increased range of motion Hidden mini stash pocket lets you pre-load items up to 2” long Construction: Stretch flatlock sleeve and main body seams Tonal branding reduces visual profile Soft, stitchless printed size label 4-way stretch knit fabric Fabric and Technology: 65 oz. 58% Polyester, 42% 37.5® Polyester VaporCore™, powered by 37.5® technology, promotes active cooling and rapid drying


Vertx Full Guard Performance Long Sleeve Shirt Our Price: $59.99 Sale Price: $39.99 You save $20.00!	Viktos LEO Duty Glove Our Price: $44.99	Viktos LEO Vented Duty Glove Our Price: $49.99

Microclimate Management in Motion Every operator needs a baselayer they can depend on to perform in any condition. Constructed using VaporCore™, powered by 37.5® technology, the short sleeve Full Guard Performance Shirt provides unmatched moisture and heat management no matter the environment. Whether you’re putting in work at the range or in the gym the shirt’s raglan style sleeve, semi-compression fit and long-line hem ensure maximum mobility and coverage while on the move. Built for the Prepared Professional™, the Full Guard Performance Shirt is more than the average baselayer. Features: Semi-compression fit comfortably skims the body without squeezing Longline hem stays tucked in during every activity level Raglan style sleeves reduce shoulder restriction for added comfort and mobility Easily layers under low-profile or overt pieces to increase performance in the field Gusseted underarm provides increased range of motion Hidden mini stash pocket lets you pre-load items up to 2” long Construction: Stretch flatlock sleeve and main body seams Tonal branding reduces visual profile Soft, stitchless printed size label 4-way stretch knit fabric Fabric and Technology: 65 oz. 58% Polyester, 42% 37.5® Polyester VaporCore™, powered by 37.5® technology, promotes active cooling and rapid drying	Main Compartment - Total Capacity - Weight -	.


Viktos Wartorn Glove Our Price: $64.99 Sale Price: $49.99 You save $15.00!	Viktos LEO Riot Glove Our Price: $94.99 Sale Price: $72.99 You save $22.00!	Condor Combat Shirt S/S Black Our Price: $74.99

.	.	The Condor Short Sleeve Combat Shirt is an alternative to the traditional polo shirt which can be used as relaxed duty uniform or a hot weather range shirt. The short sleeve design made with moisture wicking, lightweight, and breathable material will keep you cool and dry in the hottest environments plus its modified raglan cut sleeves for improved range of motion. Raglan cut sleeves for improved range of motion Mesh underarm panel to increase ventilation Mesh lined collar Two bicep pockets with YKK zipper closures Two upper arm patch panels Moisture wicking Anti-static Anti-Microbial and Odor-Control with Charcoal infused natural fiber


5.11 Taclite pro L/S Shirt Our Price: $99.99 Sale Price: $74.99 You save $25.00!	Viktos LEO Insulated Glove Our Price: $74.99	Viktos Coldshot Glove Our Price: $74.99

The Long Sleeve TACLITE® Pro Shirt remains one of our most popular designs, crafted from our proprietary 4 oz. poly/cotton TACLITE® ripstop fabric, and Teflon® treated for stain, liquid, and soil resistance. Built from 4.4 oz. TACLITE® poly/cotton ripstop fabric Long sleeves offer adjustable cuffs and sleeve-keeper Gusseted underarms for mobility Teflon® treated for stain, soil, and liquid resistance Twin chest pockets with pen slots Epaulettes and badge holder included Cape-back vent Melamine buttons won't burn, crack, or melt Bartacking at all stress points Locker loop on inner collar Lightweight, durable, comfortable Enhanced ventilation for warm climates Quick dry, moisture wicking action	.	.


Kore Essentials G1 Garrison 1.75" Gun Belt Our Price: $84.99 (1)	Condor Alpha Fleece Our Price: $89.99	Condor Combat Long Sleeve Shirt Our Price: $89.99

Best fitting, most comfortable EDC gun belt you’ll ever wear. Precise, secure fit provides a smooth, fast draw every time. NO Belt Holes. Instead Kore concealed carry belts use a hidden track with 40+ sizing positions, to adjust ¼” at a time. It's 800% more adjustable vs. traditional gun belt with holes. Designed to support small to medium weight firearms (4 lbs. max). Classic buckle designs available, because no one needs to know you’re carrying. Top Grain Leather with our proprietary Reinforced Power-Core™center for support & stiffness. Buckle styles differ but mechanism and function is the same. Leather Gun Belts are 1.5" wide and One-Size to fit any waist size from 24” up to 44” (XL up to 54"). Belt is secured to buckle using large teeth clamp and 2 set screws with hex wrench (included). Kore Essentials offers a wide variety of heavy-duty ratcheting buckles (4.5 cm x 6 cm) designed to work with KE gun belts. Buckles are constructed of either high-grade, zinc alloy, with an electroplated gunmetal or black powder-coat finish, or solid stainless steel (all contain nickel). The buckle mechanism features our Kore designed and patented, spring-loaded system that's durable, reliable and won't stick. All gun buckles enlist the use of 2 set screws (M4 x 7 mm length), and a row of teeth, to securely hold the belts into the buckles. This upgraded system is extremely secure. An Allen wrench is included (2 mm). Gun Belts Kore EDC gun belts feature a 10” virtually indestructible, hidden track with 40+ size positions to adjust with. Now you can precisely adjust your gun belt in small 1/4” increments for a perfect fit. It's the ultimate concealed carry belt for work, play, the range, or even out on the town. All Kore Essentials gun belts (leather & tactical) feature our Proprietary Reinforced Power-Core™ center. This unique blend makes our belts sturdy and stiff enough to support your firearm and gear with out any sag, yet flexible enough to sit, walk, or move in all day. It's the most secure, comfortable gun belt you will ever wear. EDC Leather & Tactical Gun Belts are 1.5" wideand 5 mm thick, and designed for IWB, OWB and Appendix carry situations. EDC Belts come in regular sizes (24" to 54") and XL sizes to fit waist up to 72". Check sizes when ordering. Garrison Leather and Tactical Belts are 1.75" wide belts and designed for the range, excursions, training or law enforcement. Due to there width they are not ideal for IWB or Appendix. Garrison Belts come in one size that fits any waist from 24" up to 54". Check sizes when ordering. Leather gun belts are constructed using 2 full-length pieces of Full Grain Buffalo leather or Top Grain leather and designed to support loads up to a maximum of 6 lbs. for Full Grain and 4lbs. for Top Grain (that's total gear weight). These belts are not designed to serve as tactical or duty belts, but rather EDC belts for work, play, dress, casual and a night out on the town. Kore nylon web tactical belts are stiffer and more rigid than our leather gun belts, and intended to support heavier loads and more gear. Constructed using Nylon Web outer layer (rated to 500 lbs.), Reinforced Power-Core Center™ and Super-Fiber inner liner for added strength and durability. Tactical belts are designed to support holstered firearms or gear up to a maximum of 8 lbs. (total weight). Due to the stiffness of our tactical belts they include a Belt Keeper to keep the belt tip flush with your pants. NotGun buckles and belts are NOT interchangeable with any of our Classic Fashion buckles or belts. EDC Gun belts are wider and thicker than our fashion belts. If a particular belt color or style does not appear in the selection menu we may be temporarily sold ou Includes: X1 Style Gun Buckle & Black Top Grain Leather Reinforced Belt [hex wrench & set screws] <br / / / / / / / / / / / / /><br / / / / / / / / / / / / /><p>Gun belts are ONE-SIZE and FIT ANY WAIST from 24” up to 44" [XL & Tactical belts up to 54"]</p> <p>Here’s how to trim your new belt for a perfect fit. It’s easy and only takes a minute to do.</p> <ol><li>On the back of the belt we printed a sizing ruler. Locate your pant size on the ruler - ADD 4 inches and CUT - using sharp, heavy-duty scissors.</li><li>For example, if your pant size is 32” – cut the belt at 36” mark. If your pant size is is close to the maximum – do NOT cut the belt. Proceed to step 3.</li><li>Using the wrench that is included, loosen the screws on the back of the buckle.</li><li>Insert cut or blunt end of belt into buckle teeth and clamp down firmly. It’s OK to use force if needed (use tabletop for leverage) - the buckle won’t break.</li><li>Tighten the screws until they are flush with the buckle. You will get resistance.</li><li>Feed belt around your waist (L to R), thru buckle and the first belt loop. Pull until belt feels snug.</li><li>Ideally, your belt tip should extend beyond the first belt loop by 2-3 inches. If your belt is too long – just remove the buckle and trim off one inch at a time until the desired length is achieved. Cut with Caution. </li></ol><p>Gun belts are ONE-SIZE and FIT ANY WAIST from 24” up to 44" [XL & Tactical belts up to 54"]</p> <p>Here’s how to trim your new belt for a perfect fit. It’s easy and only takes a minute to do.</p> <ol><li>On the back of the belt we printed a sizing ruler. Locate your pant size on the ruler - ADD 4 inches and CUT - using sharp, heavy-duty scissors.</li><li>For example, if your pant size is 32” – cut the belt at 36” mark. If your pant size is is close to the maximum – do NOT cut the belt. Proceed to step 3.</li><li>Using the wrench that is included, loosen the screws on the back of the buckle.</li><li>Insert cut or blunt end of belt into buckle teeth and clamp down firmly. It’s OK to use force if needed (use tabletop for leverage) - the buckle won’t break.</li><li>Tighten the screws until they are flush with the buckle. You will get resistance.</li><li>Feed belt around your waist (L to R), thru buckle and the first belt loop. Pull until belt feels snug.</li><li>Ideally, your belt tip should extend beyond the first belt loop by 2-3 inches. If your belt is too long – just remove the buckle and trim off one inch at a time until the desired length is achieved. Cut with Caution. </li></ol>Gun belts are ONE-SIZE and FIT ANY WAIST from 24” up to 44" [XL & Tactical belts up to 54"] Here’s how to trim your new belt for a perfect fit. It’s easy and only takes a minute to do. 1 - On the back of the belt we printed a sizing ruler. Locate your pant size on the ruler - ADD 4 inches and CUT - using sharp, heavy-duty scissors. 2 - For example, if your pant size is 32” – cut the belt at 36” mark. If your pant size is is close to the maximum – do NOT cut the belt. Proceed to step 3 3 - Using the wrench that is included, loosen the screws on the back of the buckle. 4 - Insert cut or blunt end of belt into buckle teeth and clamp down firmly. It’s OK to use force if needed (use tabletop for leverage) - the buckle won’t break. 5 - Tighten the screws until they are flush with the buckle. You will get resistance. 6 - Feed belt around your waist (L to R), thru buckle and the first belt loop. Pull until belt feels snug 7 - Ideally, your belt tip should extend beyond the first belt loop by 2-3 inches. If your belt is too long – just remove the buckle and trim off one inch at a time until the desired length is achieved. Cut with Caution.	The Condor Alpha Fleece is designed to be lightweight while providing breathability, comfort, and warmth. Equipped with abrasion resistant collar and elbows, and plenty pockets for storage, it is perfect for field operation. The Condor Alpha fleece is perfect for harsh winter days just pull the drawstring waistband and put it on under your tactical parka police uniform. Even on warmer days this tactical fleece is lightweight enough to wear all day and cut the cold wind. The outer shell is made from 100% polyester, super fine fleece with oxford reinforcement. The interior lining is laminated polyester netting fabric. The Condor Alpha Fleece has tons of pockets for your EDC including a vertical chest pocket, two slash hand pockets and shoulder pockets Reinforced collar, shoulder, and forearm Vertical chest pocket Two slash hand pockets Upper arm pocket Two inch extendible sleeve with thumb-hole Two upper arm patch panels Full front center zipper with dual sliders Drawstring waistband	The Condor Combat Shirt is what everyone has been asking for. Fully functional and comfortably fit, our signature Condor combat shirt is ready to go with you wherever you're needed. The raglan-cut sleeves provide improved range of motion while the mesh underarm panels provide natural ventilation for better breathability. This Condor shirt features anti-static and anti-microbial finishes on the chest along with moisture-wicking material, which helps to prevent dampness and odors. Several built-in pockets are essential for keeping important tools and accessories within reach. With so many features designed to enhance performance and comfort, it's no surprise that this is one of our most popular Condor tactical shirts. The Condor combat shirt is ready to tackle any challenge in the field. Raglan cut sleeves for improved range of motion Mesh underarm panel to increase ventilation Mesh lined collar Two bicep pockets with YKK zipper closures Two upper arm patch panels Elbow pad pockets Reinforced elbow Hook and loop cuff adjustment Moisture wicking Anti-static Anti-Microbial and Odor-Control with Charcoal infused natural fiber


Kore Essentials X1 Gun Belt Our Price: $89.99	Kore Essentials X5 Gun Belt Our Price: $89.99	Kore Essentials X3 Gun Belt Our Price: $89.99 (1)

Best fitting, most comfortable EDC gun belt you’ll ever wear. Precise, secure fit provides a smooth, fast draw every time. NO Belt Holes. Instead Kore concealed carry belts use a hidden track with 40+ sizing positions, to adjust ¼” at a time. It's 800% more adjustable vs. traditional gun belt with holes. Designed to support small to medium weight firearms (4 lbs. max). Classic buckle designs available, because no one needs to know you’re carrying. Top Grain Leather with our proprietary Reinforced Power-Core™center for support & stiffness. Buckle styles differ but mechanism and function is the same. Leather Gun Belts are 1.5" wide and One-Size to fit any waist size from 24” up to 44” (XL up to 54"). Belt is secured to buckle using large teeth clamp and 2 set screws with hex wrench (included). Kore Essentials offers a wide variety of heavy-duty ratcheting buckles (4.5 cm x 6 cm) designed to work with KE gun belts. Buckles are constructed of either high-grade, zinc alloy, with an electroplated gunmetal or black powder-coat finish, or solid stainless steel (all contain nickel). The buckle mechanism features our Kore designed and patented, spring-loaded system that's durable, reliable and won't stick. All gun buckles enlist the use of 2 set screws (M4 x 7 mm length), and a row of teeth, to securely hold the belts into the buckles. This upgraded system is extremely secure. An Allen wrench is included (2 mm). Gun Belts Kore EDC gun belts feature a 10” virtually indestructible, hidden track with 40+ size positions to adjust with. Now you can precisely adjust your gun belt in small 1/4” increments for a perfect fit. It's the ultimate concealed carry belt for work, play, the range, or even out on the town. All Kore Essentials gun belts (leather & tactical) feature our Proprietary Reinforced Power-Core™ center. This unique blend makes our belts sturdy and stiff enough to support your firearm and gear with out any sag, yet flexible enough to sit, walk, or move in all day. It's the most secure, comfortable gun belt you will ever wear. EDC Leather & Tactical Gun Belts are 1.5" wideand 5 mm thick, and designed for IWB, OWB and Appendix carry situations. EDC Belts come in regular sizes (24" to 54") and XL sizes to fit waist up to 72". Check sizes when ordering. Garrison Leather and Tactical Belts are 1.75" wide belts and designed for the range, excursions, training or law enforcement. Due to there width they are not ideal for IWB or Appendix. Garrison Belts come in one size that fits any waist from 24" up to 54". Check sizes when ordering. Leather gun belts are constructed using 2 full-length pieces of Full Grain Buffalo leather or Top Grain leather and designed to support loads up to a maximum of 6 lbs. for Full Grain and 4lbs. for Top Grain (that's total gear weight). These belts are not designed to serve as tactical or duty belts, but rather EDC belts for work, play, dress, casual and a night out on the town. Kore nylon web tactical belts are stiffer and more rigid than our leather gun belts, and intended to support heavier loads and more gear. Constructed using Nylon Web outer layer (rated to 500 lbs.), Reinforced Power-Core Center™ and Super-Fiber inner liner for added strength and durability. Tactical belts are designed to support holstered firearms or gear up to a maximum of 8 lbs. (total weight). Due to the stiffness of our tactical belts they include a Belt Keeper to keep the belt tip flush with your pants. NotGun buckles and belts are NOT interchangeable with any of our Classic Fashion buckles or belts. EDC Gun belts are wider and thicker than our fashion belts. If a particular belt color or style does not appear in the selection menu we may be temporarily sold ou Includes: X1 Style Gun Buckle & Black Top Grain Leather Reinforced Belt [hex wrench & set screws] <br / / / / / / / /><br / / / / / / / /><p>Gun belts are ONE-SIZE and FIT ANY WAIST from 24” up to 44" [XL & Tactical belts up to 54"]</p> <p>Here’s how to trim your new belt for a perfect fit. It’s easy and only takes a minute to do.</p> <ol><li>On the back of the belt we printed a sizing ruler. Locate your pant size on the ruler - ADD 4 inches and CUT - using sharp, heavy-duty scissors.</li><li>For example, if your pant size is 32” – cut the belt at 36” mark. If your pant size is is close to the maximum – do NOT cut the belt. Proceed to step 3.</li><li>Using the wrench that is included, loosen the screws on the back of the buckle.</li><li>Insert cut or blunt end of belt into buckle teeth and clamp down firmly. It’s OK to use force if needed (use tabletop for leverage) - the buckle won’t break.</li><li>Tighten the screws until they are flush with the buckle. You will get resistance.</li><li>Feed belt around your waist (L to R), thru buckle and the first belt loop. Pull until belt feels snug.</li><li>Ideally, your belt tip should extend beyond the first belt loop by 2-3 inches. If your belt is too long – just remove the buckle and trim off one inch at a time until the desired length is achieved. Cut with Caution. </li></ol><p>Gun belts are ONE-SIZE and FIT ANY WAIST from 24” up to 44" [XL & Tactical belts up to 54"]</p> <p>Here’s how to trim your new belt for a perfect fit. It’s easy and only takes a minute to do.</p> <ol><li>On the back of the belt we printed a sizing ruler. Locate your pant size on the ruler - ADD 4 inches and CUT - using sharp, heavy-duty scissors.</li><li>For example, if your pant size is 32” – cut the belt at 36” mark. If your pant size is is close to the maximum – do NOT cut the belt. Proceed to step 3.</li><li>Using the wrench that is included, loosen the screws on the back of the buckle.</li><li>Insert cut or blunt end of belt into buckle teeth and clamp down firmly. It’s OK to use force if needed (use tabletop for leverage) - the buckle won’t break.</li><li>Tighten the screws until they are flush with the buckle. You will get resistance.</li><li>Feed belt around your waist (L to R), thru buckle and the first belt loop. Pull until belt feels snug.</li><li>Ideally, your belt tip should extend beyond the first belt loop by 2-3 inches. If your belt is too long – just remove the buckle and trim off one inch at a time until the desired length is achieved. Cut with Caution. </li></ol>Gun belts are ONE-SIZE and FIT ANY WAIST from 24” up to 44" [XL & Tactical belts up to 54"] Here’s how to trim your new belt for a perfect fit. It’s easy and only takes a minute to do. 1 - On the back of the belt we printed a sizing ruler. Locate your pant size on the ruler - ADD 4 inches and CUT - using sharp, heavy-duty scissors. 2 - For example, if your pant size is 32” – cut the belt at 36” mark. If your pant size is is close to the maximum – do NOT cut the belt. Proceed to step 3 3 - Using the wrench that is included, loosen the screws on the back of the buckle. 4 - Insert cut or blunt end of belt into buckle teeth and clamp down firmly. It’s OK to use force if needed (use tabletop for leverage) - the buckle won’t break. 5 - Tighten the screws until they are flush with the buckle. You will get resistance. 6 - Feed belt around your waist (L to R), thru buckle and the first belt loop. Pull until belt feels snug 7 - Ideally, your belt tip should extend beyond the first belt loop by 2-3 inches. If your belt is too long – just remove the buckle and trim off one inch at a time until the desired length is achieved. Cut with Caution.	Best fitting, most comfortable EDC gun belt you’ll ever wear. Precise, secure fit provides a smooth, fast draw every time. NO Belt Holes. Instead Kore concealed carry belts use a hidden track with 40+ sizing positions, to adjust ¼” at a time. It's 800% more adjustable vs. traditional gun belt with holes. Designed to support small to medium weight firearms (4 lbs. max). Classic buckle designs available, because no one needs to know you’re carrying. Top Grain Leather with our proprietary Reinforced Power-Core™center for support & stiffness. Buckle styles differ but mechanism and function is the same. Leather Gun Belts are 1.5" wide and One-Size to fit any waist size from 24” up to 44” (XL up to 54"). Belt is secured to buckle using large teeth clamp and 2 set screws with hex wrench (included). Kore Essentials offers a wide variety of heavy-duty ratcheting buckles (4.5 cm x 6 cm) designed to work with KE gun belts. Buckles are constructed of either high-grade, zinc alloy, with an electroplated gunmetal or black powder-coat finish, or solid stainless steel (all contain nickel). The buckle mechanism features our Kore designed and patented, spring-loaded system that's durable, reliable and won't stick. All gun buckles enlist the use of 2 set screws (M4 x 7 mm length), and a row of teeth, to securely hold the belts into the buckles. This upgraded system is extremely secure. An Allen wrench is included (2 mm). Gun Belts Kore EDC gun belts feature a 10” virtually indestructible, hidden track with 40+ size positions to adjust with. Now you can precisely adjust your gun belt in small 1/4” increments for a perfect fit. It's the ultimate concealed carry belt for work, play, the range, or even out on the town. All Kore Essentials gun belts (leather & tactical) feature our Proprietary Reinforced Power-Core™ center. This unique blend makes our belts sturdy and stiff enough to support your firearm and gear with out any sag, yet flexible enough to sit, walk, or move in all day. It's the most secure, comfortable gun belt you will ever wear. EDC Leather & Tactical Gun Belts are 1.5" wideand 5 mm thick, and designed for IWB, OWB and Appendix carry situations. EDC Belts come in regular sizes (24" to 54") and XL sizes to fit waist up to 72". Check sizes when ordering. Garrison Leather and Tactical Belts are 1.75" wide belts and designed for the range, excursions, training or law enforcement. Due to there width they are not ideal for IWB or Appendix. Garrison Belts come in one size that fits any waist from 24" up to 54". Check sizes when ordering. Leather gun belts are constructed using 2 full-length pieces of Full Grain Buffalo leather or Top Grain leather and designed to support loads up to a maximum of 6 lbs. for Full Grain and 4lbs. for Top Grain (that's total gear weight). These belts are not designed to serve as tactical or duty belts, but rather EDC belts for work, play, dress, casual and a night out on the town. Kore nylon web tactical belts are stiffer and more rigid than our leather gun belts, and intended to support heavier loads and more gear. Constructed using Nylon Web outer layer (rated to 500 lbs.), Reinforced Power-Core Center™ and Super-Fiber inner liner for added strength and durability. Tactical belts are designed to support holstered firearms or gear up to a maximum of 8 lbs. (total weight). Due to the stiffness of our tactical belts they include a Belt Keeper to keep the belt tip flush with your pants. NotGun buckles and belts are NOT interchangeable with any of our Classic Fashion buckles or belts. EDC Gun belts are wider and thicker than our fashion belts. If a particular belt color or style does not appear in the selection menu we may be temporarily sold ou Includes: X1 Style Gun Buckle & Black Top Grain Leather Reinforced Belt [hex wrench & set screws] <br / / / / / / / / / / / / / /><br / / / / / / / / / / / / / /><p>Gun belts are ONE-SIZE and FIT ANY WAIST from 24” up to 44" [XL & Tactical belts up to 54"]</p> <p>Here’s how to trim your new belt for a perfect fit. It’s easy and only takes a minute to do.</p> <ol><li>On the back of the belt we printed a sizing ruler. Locate your pant size on the ruler - ADD 4 inches and CUT - using sharp, heavy-duty scissors.</li><li>For example, if your pant size is 32” – cut the belt at 36” mark. If your pant size is is close to the maximum – do NOT cut the belt. Proceed to step 3.</li><li>Using the wrench that is included, loosen the screws on the back of the buckle.</li><li>Insert cut or blunt end of belt into buckle teeth and clamp down firmly. It’s OK to use force if needed (use tabletop for leverage) - the buckle won’t break.</li><li>Tighten the screws until they are flush with the buckle. You will get resistance.</li><li>Feed belt around your waist (L to R), thru buckle and the first belt loop. Pull until belt feels snug.</li><li>Ideally, your belt tip should extend beyond the first belt loop by 2-3 inches. If your belt is too long – just remove the buckle and trim off one inch at a time until the desired length is achieved. Cut with Caution. </li></ol><p>Gun belts are ONE-SIZE and FIT ANY WAIST from 24” up to 44" [XL & Tactical belts up to 54"]</p> <p>Here’s how to trim your new belt for a perfect fit. It’s easy and only takes a minute to do.</p> <ol><li>On the back of the belt we printed a sizing ruler. Locate your pant size on the ruler - ADD 4 inches and CUT - using sharp, heavy-duty scissors.</li><li>For example, if your pant size is 32” – cut the belt at 36” mark. If your pant size is is close to the maximum – do NOT cut the belt. Proceed to step 3.</li><li>Using the wrench that is included, loosen the screws on the back of the buckle.</li><li>Insert cut or blunt end of belt into buckle teeth and clamp down firmly. It’s OK to use force if needed (use tabletop for leverage) - the buckle won’t break.</li><li>Tighten the screws until they are flush with the buckle. You will get resistance.</li><li>Feed belt around your waist (L to R), thru buckle and the first belt loop. Pull until belt feels snug.</li><li>Ideally, your belt tip should extend beyond the first belt loop by 2-3 inches. If your belt is too long – just remove the buckle and trim off one inch at a time until the desired length is achieved. Cut with Caution. </li></ol>Gun belts are ONE-SIZE and FIT ANY WAIST from 24” up to 44" [XL & Tactical belts up to 54"] Here’s how to trim your new belt for a perfect fit. It’s easy and only takes a minute to do. 1 - On the back of the belt we printed a sizing ruler. Locate your pant size on the ruler - ADD 4 inches and CUT - using sharp, heavy-duty scissors. 2 - For example, if your pant size is 32” – cut the belt at 36” mark. If your pant size is is close to the maximum – do NOT cut the belt. Proceed to step 3 3 - Using the wrench that is included, loosen the screws on the back of the buckle. 4 - Insert cut or blunt end of belt into buckle teeth and clamp down firmly. It’s OK to use force if needed (use tabletop for leverage) - the buckle won’t break. 5 - Tighten the screws until they are flush with the buckle. You will get resistance. 6 - Feed belt around your waist (L to R), thru buckle and the first belt loop. Pull until belt feels snug 7 - Ideally, your belt tip should extend beyond the first belt loop by 2-3 inches. If your belt is too long – just remove the buckle and trim off one inch at a time until the desired length is achieved. Cut with Caution.	Best fitting, most comfortable EDC gun belt you’ll ever wear. Precise, secure fit provides a smooth, fast draw every time. NO Belt Holes. Instead Kore concealed carry belts use a hidden track with 40+ sizing positions, to adjust ¼” at a time. It's 800% more adjustable vs. traditional gun belt with holes. Designed to support small to medium weight firearms (4 lbs. max). Classic buckle designs available, because no one needs to know you’re carrying. Top Grain Leather with our proprietary Reinforced Power-Core™center for support & stiffness. Buckle styles differ but mechanism and function is the same. Leather Gun Belts are 1.5" wide and One-Size to fit any waist size from 24” up to 44” (XL up to 54"). Belt is secured to buckle using large teeth clamp and 2 set screws with hex wrench (included). Kore Essentials offers a wide variety of heavy-duty ratcheting buckles (4.5 cm x 6 cm) designed to work with KE gun belts. Buckles are constructed of either high-grade, zinc alloy, with an electroplated gunmetal or black powder-coat finish, or solid stainless steel (all contain nickel). The buckle mechanism features our Kore designed and patented, spring-loaded system that's durable, reliable and won't stick. All gun buckles enlist the use of 2 set screws (M4 x 7 mm length), and a row of teeth, to securely hold the belts into the buckles. This upgraded system is extremely secure. An Allen wrench is included (2 mm). Gun Belts Kore EDC gun belts feature a 10” virtually indestructible, hidden track with 40+ size positions to adjust with. Now you can precisely adjust your gun belt in small 1/4” increments for a perfect fit. It's the ultimate concealed carry belt for work, play, the range, or even out on the town. All Kore Essentials gun belts (leather & tactical) feature our Proprietary Reinforced Power-Core™ center. This unique blend makes our belts sturdy and stiff enough to support your firearm and gear with out any sag, yet flexible enough to sit, walk, or move in all day. It's the most secure, comfortable gun belt you will ever wear. EDC Leather & Tactical Gun Belts are 1.5" wideand 5 mm thick, and designed for IWB, OWB and Appendix carry situations. EDC Belts come in regular sizes (24" to 54") and XL sizes to fit waist up to 72". Check sizes when ordering. Garrison Leather and Tactical Belts are 1.75" wide belts and designed for the range, excursions, training or law enforcement. Due to there width they are not ideal for IWB or Appendix. Garrison Belts come in one size that fits any waist from 24" up to 54". Check sizes when ordering. Leather gun belts are constructed using 2 full-length pieces of Full Grain Buffalo leather or Top Grain leather and designed to support loads up to a maximum of 6 lbs. for Full Grain and 4lbs. for Top Grain (that's total gear weight). These belts are not designed to serve as tactical or duty belts, but rather EDC belts for work, play, dress, casual and a night out on the town. Kore nylon web tactical belts are stiffer and more rigid than our leather gun belts, and intended to support heavier loads and more gear. Constructed using Nylon Web outer layer (rated to 500 lbs.), Reinforced Power-Core Center™ and Super-Fiber inner liner for added strength and durability. Tactical belts are designed to support holstered firearms or gear up to a maximum of 8 lbs. (total weight). Due to the stiffness of our tactical belts they include a Belt Keeper to keep the belt tip flush with your pants. NotGun buckles and belts are NOT interchangeable with any of our Classic Fashion buckles or belts. EDC Gun belts are wider and thicker than our fashion belts. If a particular belt color or style does not appear in the selection menu we may be temporarily sold ou Includes: X1 Style Gun Buckle & Black Top Grain Leather Reinforced Belt [hex wrench & set screws] <br / / / / / / / / / / / / / / /><br / / / / / / / / / / / / / / /><p>Gun belts are ONE-SIZE and FIT ANY WAIST from 24” up to 44" [XL & Tactical belts up to 54"]</p> <p>Here’s how to trim your new belt for a perfect fit. It’s easy and only takes a minute to do.</p> <ol><li>On the back of the belt we printed a sizing ruler. Locate your pant size on the ruler - ADD 4 inches and CUT - using sharp, heavy-duty scissors.</li><li>For example, if your pant size is 32” – cut the belt at 36” mark. If your pant size is is close to the maximum – do NOT cut the belt. Proceed to step 3.</li><li>Using the wrench that is included, loosen the screws on the back of the buckle.</li><li>Insert cut or blunt end of belt into buckle teeth and clamp down firmly. It’s OK to use force if needed (use tabletop for leverage) - the buckle won’t break.</li><li>Tighten the screws until they are flush with the buckle. You will get resistance.</li><li>Feed belt around your waist (L to R), thru buckle and the first belt loop. Pull until belt feels snug.</li><li>Ideally, your belt tip should extend beyond the first belt loop by 2-3 inches. If your belt is too long – just remove the buckle and trim off one inch at a time until the desired length is achieved. Cut with Caution. </li></ol><p>Gun belts are ONE-SIZE and FIT ANY WAIST from 24” up to 44" [XL & Tactical belts up to 54"]</p> <p>Here’s how to trim your new belt for a perfect fit. It’s easy and only takes a minute to do.</p> <ol><li>On the back of the belt we printed a sizing ruler. Locate your pant size on the ruler - ADD 4 inches and CUT - using sharp, heavy-duty scissors.</li><li>For example, if your pant size is 32” – cut the belt at 36” mark. If your pant size is is close to the maximum – do NOT cut the belt. Proceed to step 3.</li><li>Using the wrench that is included, loosen the screws on the back of the buckle.</li><li>Insert cut or blunt end of belt into buckle teeth and clamp down firmly. It’s OK to use force if needed (use tabletop for leverage) - the buckle won’t break.</li><li>Tighten the screws until they are flush with the buckle. You will get resistance.</li><li>Feed belt around your waist (L to R), thru buckle and the first belt loop. Pull until belt feels snug.</li><li>Ideally, your belt tip should extend beyond the first belt loop by 2-3 inches. If your belt is too long – just remove the buckle and trim off one inch at a time until the desired length is achieved. Cut with Caution. </li></ol>Gun belts are ONE-SIZE and FIT ANY WAIST from 24” up to 44" [XL & Tactical belts up to 54"] Here’s how to trim your new belt for a perfect fit. It’s easy and only takes a minute to do. 1 - On the back of the belt we printed a sizing ruler. Locate your pant size on the ruler - ADD 4 inches and CUT - using sharp, heavy-duty scissors. 2 - For example, if your pant size is 32” – cut the belt at 36” mark. If your pant size is is close to the maximum – do NOT cut the belt. Proceed to step 3 3 - Using the wrench that is included, loosen the screws on the back of the buckle. 4 - Insert cut or blunt end of belt into buckle teeth and clamp down firmly. It’s OK to use force if needed (use tabletop for leverage) - the buckle won’t break. 5 - Tighten the screws until they are flush with the buckle. You will get resistance. 6 - Feed belt around your waist (L to R), thru buckle and the first belt loop. Pull until belt feels snug 7 - Ideally, your belt tip should extend beyond the first belt loop by 2-3 inches. If your belt is too long – just remove the buckle and trim off one inch at a time until the desired length is achieved. Cut with Caution.


Kore Essentials X4 Gun Belt Our Price: $89.99	Kore Essentials Buffalo Leather Gun Belt Our Price: $89.99	Kore Essentials MultiCam Our Price: $89.99

Best fitting, most comfortable EDC gun belt you’ll ever wear. Precise, secure fit provides a smooth, fast draw every time. NO Belt Holes. Instead Kore concealed carry belts use a hidden track with 40+ sizing positions, to adjust ¼” at a time. It's 800% more adjustable vs. traditional gun belt with holes. Designed to support small to medium weight firearms (4 lbs. max). Classic buckle designs available, because no one needs to know you’re carrying. Top Grain Leather with our proprietary Reinforced Power-Core™center for support & stiffness. Buckle styles differ but mechanism and function is the same. Leather Gun Belts are 1.5" wide and One-Size to fit any waist size from 24” up to 44” (XL up to 54"). Belt is secured to buckle using large teeth clamp and 2 set screws with hex wrench (included). Kore Essentials offers a wide variety of heavy-duty ratcheting buckles (4.5 cm x 6 cm) designed to work with KE gun belts. Buckles are constructed of either high-grade, zinc alloy, with an electroplated gunmetal or black powder-coat finish, or solid stainless steel (all contain nickel). The buckle mechanism features our Kore designed and patented, spring-loaded system that's durable, reliable and won't stick. All gun buckles enlist the use of 2 set screws (M4 x 7 mm length), and a row of teeth, to securely hold the belts into the buckles. This upgraded system is extremely secure. An Allen wrench is included (2 mm). Gun Belts Kore EDC gun belts feature a 10” virtually indestructible, hidden track with 40+ size positions to adjust with. Now you can precisely adjust your gun belt in small 1/4” increments for a perfect fit. It's the ultimate concealed carry belt for work, play, the range, or even out on the town. All Kore Essentials gun belts (leather & tactical) feature our Proprietary Reinforced Power-Core™ center. This unique blend makes our belts sturdy and stiff enough to support your firearm and gear with out any sag, yet flexible enough to sit, walk, or move in all day. It's the most secure, comfortable gun belt you will ever wear. EDC Leather & Tactical Gun Belts are 1.5" wideand 5 mm thick, and designed for IWB, OWB and Appendix carry situations. EDC Belts come in regular sizes (24" to 54") and XL sizes to fit waist up to 72". Check sizes when ordering. Garrison Leather and Tactical Belts are 1.75" wide belts and designed for the range, excursions, training or law enforcement. Due to there width they are not ideal for IWB or Appendix. Garrison Belts come in one size that fits any waist from 24" up to 54". Check sizes when ordering. Leather gun belts are constructed using 2 full-length pieces of Full Grain Buffalo leather or Top Grain leather and designed to support loads up to a maximum of 6 lbs. for Full Grain and 4lbs. for Top Grain (that's total gear weight). These belts are not designed to serve as tactical or duty belts, but rather EDC belts for work, play, dress, casual and a night out on the town. Kore nylon web tactical belts are stiffer and more rigid than our leather gun belts, and intended to support heavier loads and more gear. Constructed using Nylon Web outer layer (rated to 500 lbs.), Reinforced Power-Core Center™ and Super-Fiber inner liner for added strength and durability. Tactical belts are designed to support holstered firearms or gear up to a maximum of 8 lbs. (total weight). Due to the stiffness of our tactical belts they include a Belt Keeper to keep the belt tip flush with your pants. NotGun buckles and belts are NOT interchangeable with any of our Classic Fashion buckles or belts. EDC Gun belts are wider and thicker than our fashion belts. If a particular belt color or style does not appear in the selection menu we may be temporarily sold ou Includes: X1 Style Gun Buckle & Black Top Grain Leather Reinforced Belt [hex wrench & set screws] <br / / / / / / / / / / / /><br / / / / / / / / / / / /><p>Gun belts are ONE-SIZE and FIT ANY WAIST from 24” up to 44" [XL & Tactical belts up to 54"]</p> <p>Here’s how to trim your new belt for a perfect fit. It’s easy and only takes a minute to do.</p> <ol><li>On the back of the belt we printed a sizing ruler. Locate your pant size on the ruler - ADD 4 inches and CUT - using sharp, heavy-duty scissors.</li><li>For example, if your pant size is 32” – cut the belt at 36” mark. If your pant size is is close to the maximum – do NOT cut the belt. Proceed to step 3.</li><li>Using the wrench that is included, loosen the screws on the back of the buckle.</li><li>Insert cut or blunt end of belt into buckle teeth and clamp down firmly. It’s OK to use force if needed (use tabletop for leverage) - the buckle won’t break.</li><li>Tighten the screws until they are flush with the buckle. You will get resistance.</li><li>Feed belt around your waist (L to R), thru buckle and the first belt loop. Pull until belt feels snug.</li><li>Ideally, your belt tip should extend beyond the first belt loop by 2-3 inches. If your belt is too long – just remove the buckle and trim off one inch at a time until the desired length is achieved. Cut with Caution. </li></ol><p>Gun belts are ONE-SIZE and FIT ANY WAIST from 24” up to 44" [XL & Tactical belts up to 54"]</p> <p>Here’s how to trim your new belt for a perfect fit. It’s easy and only takes a minute to do.</p> <ol><li>On the back of the belt we printed a sizing ruler. Locate your pant size on the ruler - ADD 4 inches and CUT - using sharp, heavy-duty scissors.</li><li>For example, if your pant size is 32” – cut the belt at 36” mark. If your pant size is is close to the maximum – do NOT cut the belt. Proceed to step 3.</li><li>Using the wrench that is included, loosen the screws on the back of the buckle.</li><li>Insert cut or blunt end of belt into buckle teeth and clamp down firmly. It’s OK to use force if needed (use tabletop for leverage) - the buckle won’t break.</li><li>Tighten the screws until they are flush with the buckle. You will get resistance.</li><li>Feed belt around your waist (L to R), thru buckle and the first belt loop. Pull until belt feels snug.</li><li>Ideally, your belt tip should extend beyond the first belt loop by 2-3 inches. If your belt is too long – just remove the buckle and trim off one inch at a time until the desired length is achieved. Cut with Caution. </li></ol>Gun belts are ONE-SIZE and FIT ANY WAIST from 24” up to 44" [XL & Tactical belts up to 54"] Here’s how to trim your new belt for a perfect fit. It’s easy and only takes a minute to do. 1 - On the back of the belt we printed a sizing ruler. Locate your pant size on the ruler - ADD 4 inches and CUT - using sharp, heavy-duty scissors. 2 - For example, if your pant size is 32” – cut the belt at 36” mark. If your pant size is is close to the maximum – do NOT cut the belt. Proceed to step 3 3 - Using the wrench that is included, loosen the screws on the back of the buckle. 4 - Insert cut or blunt end of belt into buckle teeth and clamp down firmly. It’s OK to use force if needed (use tabletop for leverage) - the buckle won’t break. 5 - Tighten the screws until they are flush with the buckle. You will get resistance. 6 - Feed belt around your waist (L to R), thru buckle and the first belt loop. Pull until belt feels snug 7 - Ideally, your belt tip should extend beyond the first belt loop by 2-3 inches. If your belt is too long – just remove the buckle and trim off one inch at a time until the desired length is achieved. Cut with Caution.	Includes: Full Grain Buffalo Leather Gun Belt [1.5" wide / buckle not included] Due to the nature of buffalo leather, expect small variances of color, as well as scratches and scuffs developing as you wear the belt. This is not a defect but a natural characteristic of this leather style. If you get an unwanted scratch, try rubbing it firmly with your fingers and the oils in the belt will help to lessen it. The more you wear it, the better it looks! Designed to work with our Western and X-series Gun Buckles [1.5" wide]. Kore Western belts are constructed using 2 full-length pieces of Full Grain Buffalo Leather stitched together, with our reinforced, proprietary Power-Core™ center for added strength, stability and durability. Hidden track sewn into the back of belt features 40+ size positions to adjust with in small 1/4" increments, for a perfect fit. Built to support light to medium weight holstered firearms up to 6 lbs. Belts are One-Size and fit every waist size from 24" up to 44". <br / / / / / / / / / / /><br / / / / / / / / / / /><p>Gun belts are ONE-SIZE and FIT ANY WAIST from 24” up to 44" [XL & Tactical belts up to 54"]</p> <p>Here’s how to trim your new belt for a perfect fit. It’s easy and only takes a minute to do.</p> <ol><li>On the back of the belt we printed a sizing ruler. Locate your pant size on the ruler - ADD 4 inches and CUT - using sharp, heavy-duty scissors.</li><li>For example, if your pant size is 32” – cut the belt at 36” mark. If your pant size is is close to the maximum – do NOT cut the belt. Proceed to step 3.</li><li>Using the wrench that is included, loosen the screws on the back of the buckle.</li><li>Insert cut or blunt end of belt into buckle teeth and clamp down firmly. It’s OK to use force if needed (use tabletop for leverage) - the buckle won’t break.</li><li>Tighten the screws until they are flush with the buckle. You will get resistance.</li><li>Feed belt around your waist (L to R), thru buckle and the first belt loop. Pull until belt feels snug.</li><li>Ideally, your belt tip should extend beyond the first belt loop by 2-3 inches. If your belt is too long – just remove the buckle and trim off one inch at a time until the desired length is achieved. Cut with Caution. </li></ol><p>Gun belts are ONE-SIZE and FIT ANY WAIST from 24” up to 44" [XL & Tactical belts up to 54"]</p> <p>Here’s how to trim your new belt for a perfect fit. It’s easy and only takes a minute to do.</p> <ol><li>On the back of the belt we printed a sizing ruler. Locate your pant size on the ruler - ADD 4 inches and CUT - using sharp, heavy-duty scissors.</li><li>For example, if your pant size is 32” – cut the belt at 36” mark. If your pant size is is close to the maximum – do NOT cut the belt. Proceed to step 3.</li><li>Using the wrench that is included, loosen the screws on the back of the buckle.</li><li>Insert cut or blunt end of belt into buckle teeth and clamp down firmly. It’s OK to use force if needed (use tabletop for leverage) - the buckle won’t break.</li><li>Tighten the screws until they are flush with the buckle. You will get resistance.</li><li>Feed belt around your waist (L to R), thru buckle and the first belt loop. Pull until belt feels snug.</li><li>Ideally, your belt tip should extend beyond the first belt loop by 2-3 inches. If your belt is too long – just remove the buckle and trim off one inch at a time until the desired length is achieved. Cut with Caution. </li></ol>Gun belts are ONE-SIZE and FIT ANY WAIST from 24” up to 44" [XL & Tactical belts up to 54"] Here’s how to trim your new belt for a perfect fit. It’s easy and only takes a minute to do. 1 - On the back of the belt we printed a sizing ruler. Locate your pant size on the ruler - ADD 4 inches and CUT - using sharp, heavy-duty scissors. 2 - For example, if your pant size is 32” – cut the belt at 36” mark. If your pant size is is close to the maximum – do NOT cut the belt. Proceed to step 3 3 - Using the wrench that is included, loosen the screws on the back of the buckle. 4 - Insert cut or blunt end of belt into buckle teeth and clamp down firmly. It’s OK to use force if needed (use tabletop for leverage) - the buckle won’t break. 5 - Tighten the screws until they are flush with the buckle. You will get resistance. 6 - Feed belt around your waist (L to R), thru buckle and the first belt loop. Pull until belt feels snug 7 - Ideally, your belt tip should extend beyond the first belt loop by 2-3 inches. If your belt is too long – just remove the buckle and trim off one inch at a time until the desired length is achieved. Cut with Caution.	MultiCam® & Camo belts are constructed using high-quality, USA made materials. They are NOT quite as stiff or rigid as our tactical belts & Rated to support small to medium-size firearms, magazines and additional gear up to 6 lbs. Best fitting, most durable Tactical Gun Belt you’ll ever own. Precise, secure fit provides a smooth, fast draw every time. No Belt Holes. Instead Kore concealed carry belts use a hidden track with 40+ sizing positions, so you can adjust ¼” at a time. Outer layer material is rated to 250 lbs., with reinforced, proprietary Power-Core™ center & super-fiber inner lining, to prevent roll-over and sagging. Gun belts are One-Size & fit any waist from 24” to 54” [1.5” wide]. <br / / / / / / / / / / / /><br / / / / / / / / / / / /><p>Gun belts are ONE-SIZE and FIT ANY WAIST from 24” up to 44" [XL & Tactical belts up to 54"]</p> <p>Here’s how to trim your new belt for a perfect fit. It’s easy and only takes a minute to do.</p> <ol><li>On the back of the belt we printed a sizing ruler. Locate your pant size on the ruler - ADD 4 inches and CUT - using sharp, heavy-duty scissors.</li><li>For example, if your pant size is 32” – cut the belt at 36” mark. If your pant size is is close to the maximum – do NOT cut the belt. Proceed to step 3.</li><li>Using the wrench that is included, loosen the screws on the back of the buckle.</li><li>Insert cut or blunt end of belt into buckle teeth and clamp down firmly. It’s OK to use force if needed (use tabletop for leverage) - the buckle won’t break.</li><li>Tighten the screws until they are flush with the buckle. You will get resistance.</li><li>Feed belt around your waist (L to R), thru buckle and the first belt loop. Pull until belt feels snug.</li><li>Ideally, your belt tip should extend beyond the first belt loop by 2-3 inches. If your belt is too long – just remove the buckle and trim off one inch at a time until the desired length is achieved. Cut with Caution. </li></ol><p>Gun belts are ONE-SIZE and FIT ANY WAIST from 24” up to 44" [XL & Tactical belts up to 54"]</p> <p>Here’s how to trim your new belt for a perfect fit. It’s easy and only takes a minute to do.</p> <ol><li>On the back of the belt we printed a sizing ruler. Locate your pant size on the ruler - ADD 4 inches and CUT - using sharp, heavy-duty scissors.</li><li>For example, if your pant size is 32” – cut the belt at 36” mark. If your pant size is is close to the maximum – do NOT cut the belt. Proceed to step 3.</li><li>Using the wrench that is included, loosen the screws on the back of the buckle.</li><li>Insert cut or blunt end of belt into buckle teeth and clamp down firmly. It’s OK to use force if needed (use tabletop for leverage) - the buckle won’t break.</li><li>Tighten the screws until they are flush with the buckle. You will get resistance.</li><li>Feed belt around your waist (L to R), thru buckle and the first belt loop. Pull until belt feels snug.</li><li>Ideally, your belt tip should extend beyond the first belt loop by 2-3 inches. If your belt is too long – just remove the buckle and trim off one inch at a time until the desired length is achieved. Cut with Caution. </li></ol>Gun belts are ONE-SIZE and FIT ANY WAIST from 24” up to 44" [XL & Tactical belts up to 54"] Here’s how to trim your new belt for a perfect fit. It’s easy and only takes a minute to do. 1 - On the back of the belt we printed a sizing ruler. Locate your pant size on the ruler - ADD 4 inches and CUT - using sharp, heavy-duty scissors. 2 - For example, if your pant size is 32” – cut the belt at 36” mark. If your pant size is is close to the maximum – do NOT cut the belt. Proceed to step 3 3 - Using the wrench that is included, loosen the screws on the back of the buckle. 4 - Insert cut or blunt end of belt into buckle teeth and clamp down firmly. It’s OK to use force if needed (use tabletop for leverage) - the buckle won’t break. 5 - Tighten the screws until they are flush with the buckle. You will get resistance. 6 - Feed belt around your waist (L to R), thru buckle and the first belt loop. Pull until belt feels snug 7 - Ideally, your belt tip should extend beyond the first belt loop by 2-3 inches. If your belt is too long – just remove the buckle and trim off one inch at a time until the desired length is achieved. Cut with Caution.


5.11 Tactical 1/4 Zip Job Shirt Our Price: $99.99	Condor Prime Softshell Jacket Our Price: $99.99	Viktos Fallback Tack Hoodie Our Price: $104.99

The 1/4 Zip Job Shirt was engineered with assistance and feedback from emergency services professionals from around the world, and is designed to provide superior versatility and utility while remaining tough, comfortable, and professional, our Job Shirt is crafted from 11.6 oz. poly/cotton fleece fabric for a perfect blend of all-weather warmth and breathability.	The Condor Prime Soft-shell jacket is your all purpose jacket built with affordability and practicality in mind. This jacket is defiantly high speed low drag in its low profile approach and a perfect mens fall soft shell jacket Made with a Fleece lined interior to keep you warm on cooler Canadian days, and a water resistant soft shell exterior for extra protection from unpredictable weather, this jacket is made to keep you warm and dry on any mission. So no matter what your day has in store, the Prime will be there to see you through it. This Condor jacket ships from our warehouse in Mississauga Ontario Canada so you don't have to worry about customs, duties or brokerage fees. Or drop by our showroom in Mississauga to see it for yourself Zipper pull with Storm-Guard lining Fleece lined hoodie and interior Water resistant Soft Shell material 3.5” x 4” shoulder patch panel Mesh inner pockets wtih media port Reinforced elbow	Everyone needs a favorite hoodie. A trusted pull-over that can take the nip out of a fall range day, or stand a beach party mid watch. Built of a 12oz Cotton/Poly athletic chassis, the FALLBACK™ Shooter provides snuggly blanket sweatshirt warmth, but offers the heathered steeze of a steely-eyed lady killer. - 12oz mid-weight fleece chassis - 80% cotton / 20% polyester - Relaxed men's fit - Ribbed elastic cuff and waist - U.S. veteran designed & developed - 1-year workmanship & materials warranty

Microclimate Management in Motion

Features:

Construction:

Fabric and Technology:

Microclimate Management in Motion

Features:

Construction:

Fabric and Technology: