You are here:Home > Filters > Brand > Toor Knives
We found 46 results matching your criteria.
Sort By:
Page of 2
Our Inside Waistband Belt Clip offers an adjustable cant as well as a 1.75” loop for belts and was designed to be worn on the inside of your waistband, for ultimate concealment. Designed by DOTS, the Molle-Lock system is a durable and very effective mounting attachment for molle gear and each clip is long enough to feed through two molle loops. Our Inside Waistband Belt Clip offers an adjustable cant as well as a 1.75” loop for belts and was designed to be worn on the inside of your waistband, for ultimate concealment.
Toor Knives Molle Lok
Our Price: $24.99

Our Inside Waistband Belt Clip offers an adjustable cant as well as a 1.75” loop for belts and was designed to be worn on the inside of your waistband, for ultimate concealment. A reverse hook ensures an anchored draw, while the beveled plastic edges provide a comfortable fit, whether sitting or standing.

Necessary mounting hardware included.

Instructions:

  1. Line the bottom two holes up with the 3rd and 4th holes on the sheath
  2. Slide the two female posts through the back of the sheath holes and slide the rubber bushings in-between the posts and the clip.
  3. Place the clip back over the bushings and screw it in.

Designed by DOTS, the Molle-Lock system is a durable and very effective mounting attachment for molle gear and each clip is long enough to feed through two molle loops.

This package includes 1 Molle Mount clip and all mounting hardware that can be attached vertically or horizontally to your Toor sheath.

Instructions:

  1. Line up the first and third holes of both the mount and sheath
  2. Take the female post and slide it through the back of the sheath holes
  3. Insert the rubber bushing in between the mount and sheath
  4. Insert the screws through the mount, attaching it to the female post

Our Horizontal Carry Belt Loops were designed to offer the user a practical lightweight horizontal mounting option and although it is meant for belts, we have seen it used on many types of gear.

The straps themselves are made from a heavy-duty rubber with attached directional fasteners, which are locking button-style mechanisms trusted by the US Military for airborne operations.

**Please be aware the Horizontal Carry Belt Loops do not fit the Field 1.0 & Field 2.0.**

Instructions:

  1. To lock and release this directional fastener, first locate the locking tab on the female side of the button (it is a small deviation in the ring of the button).
  2. When attaching the female side to the male side, make sure the opposing die of the locking tab is set in, then simply press down the rest of the button.
  3. To release the mechanism, pull back the front of the button (closest to the edge of the strap) and it will easily release.

The Ultimate Belt Attachment is designed to allow an item to carried in the vertical or horizontal position on belts and web gear. This version of the Merchant features a tanto blade shape, which provides razor sharp straight edges, an extremely strong tip, and is complemented by a high bevel grind to allow for plenty of sharpening life. This version of the Merchant features a tanto blade shape, which provides razor sharp straight edges, an extremely strong tip, and is complemented by a high bevel grind to allow for plenty of sharpening life.
Toor Knives Suitor
Our Price: $309.99
Sale Price: $212.99
You save $97.00!
Toor Knives Chasm T
Our Price: $379.99
Sale Price: $254.99
You save $125.00!

The Ultimate Belt Attachment is designed to allow an item to carried in the vertical or horizontal position on belts and web gear.

This attachment closes and snaps into place for a secured carry and can be easily removed by a one-handed spring closure release.

Additionally, it includes a built-in slide lock safety to secure the mounting to the belt.

The hole spacing features ¾” centers and has a removable belt size adjustment bar that fits 2” belts down to ¼” cords and webbing.

The Suitor was designed as an ultimate, compact pocket carry blade with a minimal footprint. This version features a traditional curved blade that is flat-ground from premium CPM 154 steel in an ultra slim profile. The latest version of the Suitor has been updated with a deep-pocket carry clip, symmetrical clip placement to prevent lockbar overtravel, domed hardware and an upgraded titanium stop pin. The blade rides on phosphor bronze washers for a smooth, controlled action and is locked into the closed position using an 0.0625” steel detent ball.

Made entirely at our San Diego manufacturing facility, its lightweight titanium handles are 0.125” thick, while all of the hardware is precision counterbored to fit flush along the scales, providing a sleek profile. In the closed position, the titanium thumb studs act as a secondary stop for the blade, while also protruding slightly above the handle scale, to allow easy opening.

Mechanism Frame Lock
Overall Length 7.25"
Blade Length 3.25"
Handle Length 4.0"
Blade Thickness 0.125"
Overall Thickness 0.4"
Weight 3.2 oz
Blade Hardness 59-61 Rockwell
Steel CPM 154
Handle Material 6AL-4V Titanium
Hardware 6AL-4V
Screw Size Torx 8









































































Designed as a small footprint folding knife, the Chasm has quickly become a favored EDC companion for many. Our latest version features a Tanto blade shape made from premium CPM 154 steel, with a natural stone finish, which provides razor sharp straight edges along with an extremely strong tip. The blade is precision ground with extra high bevels for added sharpening life, as well.

The Chasm rides on phosphor bronze washers for a smooth, controlled action, and the handles, hardware, and deep carry pocket clip on this midsize knife are all constructed from 6al-4v titanium to ensure longevity and toughness. All colored handle options are finished with KG Gunkote, which provides excellent abrasion, chemical and impact resistance.

Small and lightweight, the Chasm Tanto fits perfectly and unnoticeably in your pocket for a comfortable all-day carry and is the epitome of an American-Made folding knife. Every component of this knife is made in-house at Toor Knives, here in San Diego, CA, and its premium materials are sure to last the test of time.

Mechanism Frame Lock
Overall Length 7.25"
Blade Length 3.25"
Handle Length 4.0"
Blade Thickness 0.125"
Overall Thickness 0.4"
Weight 3.4 oz
Blade Hardness 59-61 Rockwell
Steel CPM 154
Handle Material 6AL-4V Titanium
Hardware 6AL-4V
Screw Size Torx 8

















































This version of the Merchant features a tanto blade shape, which provides razor sharp straight edges, an extremely strong tip, and is complemented by a high bevel grind to allow for plenty of sharpening life. The Viper is a Toor heritage knife classified as a Tactical, Concealable and Everyday Carry blade. Its rounded blade profile provides smooth slicing with a reinforced tip, and its newly redesigned G10 handle The Viper is a Toor heritage knife classified as a Tactical, Concealable and Everyday Carry blade. Its rounded blade profile provides smooth slicing with a reinforced tip, and its newly redesigned G10 handle
Toor Knives Chasm R
Our Price: $379.99
Sale Price: $254.99
You save $125.00!
Toor Knives Viper*
Our Price: $274.99
Toor Knives Viper Outlaw*
Our Price: $274.99

The Chasm folding knife was designed as an everyday carry companion that has a much smaller footprint. The updated Folding Series knife features a blade made from premium CPM 154 steel, now with a Black Oxide finish and strengthened blade frame. The iconic recurve edge allows for multiple cutting points with smooth transitions, creating a seamless razor edge. The Chasm rides on phosphor bronze washers for a smooth, controlled action.

We've also improved on the original Chasm with a deep-carry pocket clip, domed hardware, and slightly chamfered scales. The handles, hardware, and ambidextrous pocket clip on this midsize frame lock folding knife are all constructed from 6al-4v titanium to ensure longevity and toughness. Small and lightweight, the Chasm R fits perfectly and unnoticeably in your pocket for comfortable all-day carry and is the epitome of an American-Made folding knife.

Every component of this blade is made in-house at Toor Knives, here in San Diego, CA.

Mechanism Frame Lock
Overall Length 7.25"
Blade Length 3.25"
Handle Length 4.0"
Blade Thickness 0.125"
Overall Thickness 0.4"
Weight 3.4 oz
Blade Hardness 59-61 Rockwell
Steel CPM 154
Handle Material 6AL-4V Titanium
Hardware 6AL-4V
Screw Size Torx 8

















































The Viper is a Toor heritage knife classified as a Tactical, Concealable and Everyday Carry blade. Its rounded blade profile provides smooth slicing with a reinforced tip, and its newly redesigned G10 handle is partnered with a full finger ring, which ensures comfort regardless of the position in which it's held.

The butt of the blade has our signature thumb jimping to reduce the chances of slippage when in a reverse hold, and the steep thumb ramp on the spine keeps the hand in place while in a standard hold. This minimal blade is the perfect self defense or concealable tool for your everyday carry.

Every Viper is made in the USA and includes a low-profile black KYDEX® sheath, which is compatible with any of our sheath mounts.


Click here for Ulticlip mounting options.

For best fit look at the following UltiClips

Ulticlip XL

Ulticlip Slim 3.3

Overall Length6.375"
Blade Length 2.625"
Handle Length 3.75"
Handle Material G10
Steel D2
Blade Thickness 0.1875"
Blade Hardness 57-59 Rockwell
Weight2.7 oz

















































The Viper is a Toor heritage knife classified as a Tactical, Concealable and Everyday Carry blade. Its rounded blade profile provides smooth slicing with a reinforced tip, and its newly redesigned G10 handle is partnered with a full finger ring, which ensures comfort regardless of the position in which it's held.

The butt of the blade has our signature thumb jimping to reduce the chances of slippage when in a reverse hold, and the steep thumb ramp on the spine keeps the hand in place while in a standard hold. This minimal blade is the perfect self defense or concealable tool for your everyday carry.

Every Viper is made in the USA and includes a low-profile black KYDEX® sheath, which is compatible with any of our sheath mounts.


Click here for Ulticlip mounting options.

For best fit look at the following UltiClips

Ulticlip XL

Ulticlip Slim 3.3

Overall Length6.375"
Blade Length 2.625"
Handle Length 3.75"
Handle Material G10
Steel D2
Blade Thickness 0.1875"
Blade Hardness 57-59 Rockwell
Weight2.7 oz

















































Developed with tactical minimalism in mind, the 2021 Jank Shank is lighter and stronger than previous generations, allowing for multiple carrying options and more strength during operations Developed with tactical minimalism in mind, the 2021 Jank Shank is lighter and stronger than previous generations, allowing for multiple carrying options and more strength during operations Introducing the newest addition to the ever-growing Outdoor Series, the Field 3.0. At just over 8.0” in length, the Field 3.0 is slightly smaller than the Field 2.0
Toor Knives G10 Jank Shank*
Our Price: $309.99

(1)
Toor Knives Field 3.0*
Our Price: $339.99
Toor has updated the Jank Shank frame to better accommodate the new style of textured scale, while keeping its 0.25" steel width. While this adds some weight compared to the previous skeletonized version of the blade (from 2.4 oz to 6.3 oz), the new patterned scales provided increased grip under the most demanding situations. It's the same great EDC knife you've come to love, just newly improved to tackle almost any task you can throw at it.


Every Jank Shank is made in the USA and includes a low profile FlexTech KYDEX® sheath, which is compatible with any of our five mounts.

PLEASE NOTE that the G10 Jank Shank scales are not compatible with previous Limited Edition and regular, skeletonized versions of the Jank Shank.


Click here for Ulticlip mounting options.

For best fit look at the following UltiClips

Ulticlip XL

Ulticlip Slim 3.3

Overall Length 7.0"
Blade Length 3.0"
Handle Length 4.0"
Handle Material G10
Steel Nitro-V
Blade Thickness 0.25"
Blade Hardness 59-61 Rockwell
Weight 6.3 oz



































Toor has updated the Jank Shank frame to better accommodate the new style of textured scale, while keeping its 0.25" steel width. While this adds some weight compared to the previous skeletonized version of the blade (from 2.4 oz to 6.3 oz), the new patterned scales provided increased grip under the most demanding situations. It's the same great EDC knife you've come to love, just newly improved to tackle almost any task you can throw at it.


Every Jank Shank is made in the USA and includes a low profile FlexTech KYDEX® sheath, which is compatible with any of our five mounts.

PLEASE NOTE that the G10 Jank Shank scales are not compatible with previous Limited Edition and regular, skeletonized versions of the Jank Shank.


Click here for Ulticlip mounting options.

For best fit look at the following UltiClips

Ulticlip XL

Ulticlip Slim 3.3

Overall Length 7.0"
Blade Length 3.0"
Handle Length 4.0"
Handle Material G10
Steel Nitro-V
Blade Thickness 0.25"
Blade Hardness 59-61 Rockwell
Weight 6.3 oz



































Introducing the newest addition to the ever-growing Outdoor Series, the Field 3.0. At just over 8.0” in length, the Field 3.0 is slightly smaller than the Field 2.0 and is light enough to pack on trips when weight counts, while being fully capable of carrying the workload of its larger brethren. The most noticeable differences in the design can be seen in the slimmer profile, and more notably where the blade comes to a point, making the Field 3.0 ideal for hide penetration.

The Field 3.0 features a KG Gunkote finish on the blade, providing excellent abrasion, chemical and impact resistance. While the profile has been slimmed down, the blade shape still allows for a significant steel mass behind the edge, which translates to a longer sharpening life and edge impact resistance. Each blade is also hand fitted with ebony scales in our signature outdoor pattern. The wood itself is cut and processed by the Crelicam Ebony Mill in Cameroon by a dedicated and hardworking local workforce. Each piece is unique, meaning every one of these blades has the potential to be different and stand alone. We individually process every ebony handle by hand, and we finish it with an extremely high grit and buff to ensure the wood will last a lifetime.

The Field 3.0 is made in here in San Diego, CA by our skilled and talented manufacturing team and includes a genuine Hermann Oak saddle leather sheath.

Overall Length 8.125"
Blade Length 3.625"
Handle Length 4.5"
Handle Material Ebony
Liner 0.035" Copper
Steel CPM 154
Blade Thickness 0.1875"
Blade Hardness 59-61 Rockwell
Weight 6.5 oz

































We designed the Karsumba with traditional Karambit knife features like the curved blade, but removed the ring in order to reduce its overall length, making it much easier to conceal. As a concealable blade with a low profile KYDEX sheath, Toor Krypteia has a proven track record of versatility and protection. now in Canada With roots dating all the way back to 2015, the Raven is a Toor Knives original design and our first full size model. It’s seen several modifications and updates over the years, and it's now making its return as our largest knife in the SOF Series!
Toor Knives Krypteia
Our Price: $379.99
Toor Knives Raven
Our Price: $509.99
Sale Price: $379.99
You save $130.00!
We designed the Karsumba with traditional Karambit knife features like the curved blade, but removed the ring in order to reduce its overall length, making it much easier to conceal.

Precision ground out of CPM S35VN steel, the Karsumba has the desirable toughness and edge retention Toor Knives has become known for and is strikingly lethal.

The Karsumba features a black oxide finish, and an easy to grip Canvas Micarta handle. Each one is made here in San Diego, CA by our skilled manufacturing team and comes with a black KYDEX® sheath.

Overall Length6.75"
Blade Length 2.5"
Handle Length 4.25"
Handle Material Canvas Micarta
Steel CPM s35vn
Blade Thickness 0.1875"
Blade Hardness 59-61 Rockwell
Weight6.5 oz
























As a concealable blade with a low profile KYDEX sheath, Toor Krypteia has a proven track record of versatility and protection.

Whether being used as a policing tool on the streets or tucked into the gear of a modern-day operator, this knife provides peace of mind and continues to be one of our all-time best sellers.


Additionally, it’s fitted with a textured handle, that includes a thumb ramp with jimping for reverse drawing the blade, and a lanyard hole for retention cords. The blade is flat- ground almost all the way to the spine, which provides a razor edge and increases sharpening life.

Every Krypteia is Made in the USA and includes a black Tru-Hide KYDEX® sheath, which is compatible with any of our sheath mounts.

Click here for Ulticlip mounting options.

For best fit look at the following UltiClips

Ulticlip XL

Ulticlip Slim 3.3

Overall Length8"
Blade Length4"
Handle Length4"
Handle MaterialG10
SteelCPM s35vn
Blade Thickness0.25"
Blade Hardness59-61 Rockwell
Weight7.2 oz

With roots dating all the way back to 2015, the Raven is a Toor Knives original design and our first full size model. It’s seen several modifications and updates over the years, and it's now making its return as our largest knife in the SOF Series!

We built the Raven with a 5.5” blade for heavier tasks, and it's ground with an extra high bevel for longer sharpening life and reduced weight, leaving a perfect blade-to-handle balance in hand. Additionally, we have added a harpoon false edge on the top of the blade with 45° grinds leaving seamless transition to the tip. The Raven is fitted with our original reverse grip handle, featuring rear finger groove and pommel jimping. Our signature feather textured handles with fluted grooves provide ultimate comfort and grip, along with an iconic aesthetic. The Raven is offered in a tactical Shadow Black option as well as a natural Stone & Ebony version.

We are also extremely excited to announce the integration of the Breacher Ball™ technology into the Raven! For years, we have been working on breaching options for the pommel of our fixed blades, and in 2020 we began experimenting with pointed carbide and ceramic inserts for this task. Based on those successes, we knew we had the right materials, but we faced a challenge in that it was incredibly uncomfortable to wear a knife with a point on the back of the handle!

Finally, we landed on a tungsten carbide Breacher Ball™ for the pommel. This offered the same glass breaking effect, but it gave us a much more minimal and comfortable option for the rear of the knife. This latest model of the Raven offers almost 40% of exposed carbide ball from the pommel of the knife, allowing for maximum breaking ability. The 0.1875” Breacher Ball™ is press fit into the hardened tang of the knife and secured on either side by each handle scale. This is by far the most comfortable and effective breacher on the market, and we’re thrilled to launch our carbide Breacher Ball™ on the return of the Raven, effective on standard, tempered, and safety glass!

Each Raven is proudly produced here in San Diego, CA by our skilled and talented manufacturing team and includes a FlexTech KYDEX® sheath.

Overall Length 10.25"
Blade Length 5.5"
Handle Length 4.75"
Handle Material G10 or Ebony
Steel CPM 3V
Blade Thickness 0.1875"
Blade Hardness 59-61 Rockwell
Weight 8.2 oz

















We are incredibly excited and honored to introduce our newest blade, the Mutiny, which is a Limited Edition collaboration blade between Toor Knives and Skallywag Tactical! The Chasm was originally designed as a small footprint pocketknife with the ability to tackle heavy tasks. During our first year of production, we noticed an overwhelming demand for the Tanto blade variation The Toor Serpent's 1.125" ring allows for an easy draw, with or without gloves. The blade is ground with a “tanto” grind, leaving two razor-sharp straight edges, easily mount this blade to molle, belt or your waistband  now in Canada
Toor Knives Mutiny
Our Price: $509.99
Sale Price: $379.99
You save $130.00!
Toor Chasm XLT
Our Price: $509.99
Sale Price: $379.99
You save $130.00!
Toor Knives Serpent*
Our Price: $394.99

(1)

We are incredibly excited and honored to introduce our newest blade, the Mutiny, which is a Limited Edition collaboration blade between Toor Knives and Skallywag Tactical!

This knife is the result of pooling Toor’s American manufacturing expertise combined with Skallywag’s combative and application competence. Iconic and timeless, The Mutiny is an original concept between the two brands and is purpose built for utility and everyday functionality.

With an overall length of 8.5” and weight of 6.4 oz., the Mutiny was designed as a low-profile EDC tool and pays homage to the golden age of piracy, with some added modern flair. Made from CPM 154 steel, which offers better corrosion and wear resistance, this knife also features billet Aluminum 7075 scales that are 3D textured in a hexagonal pattern and provide additional grip on the high seas. Each handle scale is individually anodized leaving it with a premium color and finish. Additionally, each piece of hardware on The Mutiny is bronze PVD coated 303 stainless steel to ensure absolute structural integrity add value to your ship’s plunder!

Every Mutiny is made by the Toor manufacturing crew in San Diego, CA and each one includes a premium KYDEX® sheath, which is compatible with all Toor mounts and resistant to nature’s roughest waters!

Overall Length 8.5"
Blade Length 4.0"
Handle Length 4.5"
Handle Material Aluminum 7075
Steel CPM 154
Blade Thickness 0.1875"
Blade Hardness 59-61 Rockwell
Weight 6.4 oz















Here at Toor Knives, our goal is to always move forward and innovate! For the last two years we have continued to develop and fine tune our Folding Series knives. Since first introducing our folders in 2020, we have relentlessly reworked, engineered, and redeveloped them from the initial, basic designs into what they are today. Now, we are proud to announce the latest advancements on our Chasm XLT folding knife!

The Chasm was originally designed as a small footprint pocketknife with the ability to tackle heavy tasks. During our first year of production, we noticed an overwhelming demand for the Tanto blade variation, and with this feedback in mind we set out to make a few substantial improvements to the design. Our most notable upgrade to the new Chasm XLT is the overall thickness of the blade – it has almost doubled to a whopping 0.2" thick! This allows for much more mass in the steel at the tip giving it improved strength.

Next, we introduced a billet titanium milled clip, which offers substantially more strength than our previous bent clips. Our new clips are machined from 6al-4v titanium, also with a starting thickness at over 0.2" thick, which is plenty of titanium for the clip to last a lifetime! Additionally, we’ve added a lockbar overtravel screw which prevents stress that could ultimately lead to lockup failures. This lockbar screw is custom machined by our talented in-house team here at Toor Knives and made from titanium like the rest of the hardware.

The new Chasm XLT also offers an innovative thumb stud design with a smooth tapered finish. We’ve improved the lockup action on the knife, and the open stop position is held secure by the titanium thumb studs. To ensure maximum thread retention on the thumb studs, we've added a T8 Torx driver head to allow for tightening. We have also provided a G10 backspacer with a lanyard hole to add to the overall rigidity of the frame, and the top of the G10 backspacer is machined with jimping notches for extra grip in the palm. Every Chasm XLT features a Black Oxide blade finish on CPM 154 steel and textured G10 show-side scale, offered in either Stealth or Carbon.
Mechanism Frame Lock
Overall Length 7.25"
Blade Length 3.125"
Handle Length 4.125"
Blade Thickness 0.22"
Overall Thickness 0.625"
Weight 3.7 oz
Blade Hardness 59-61 Rockwell
Steel CPM 154
Handle Material
G10 / 6AL-4V Titanium
Backspacer Material G10
Hardware 6AL-4V Titanium
Screw Size Torx 8
Action Phosphor Bronze Washers
Clip
6AL-4V Titanium
































































































If you’re looking for a tactical blade and space is a premium on your gear, then the Toor Knives Serpent is for you, as it’s slim line FlexTech sheath takes up minimal room.

The Serpent’s 1 1/8” ring allows for an easy draw, with or without gloves.

The blade is ground with a “Tanto” grind, leaving two razor sharp straight edges and at 3/16” thick, is just thick enough to be used as a prying tool, while thin enough to still slide through flesh.

Toor signature diamond back textured handle eliminates any chance of the blade sliding when wet, while still maintaining smooth contours for maximum comfort when concealed against the body.

Made out of a cpm3v steel with a Gunkote finish, and a textured G10 handle, this blade can stand up to the toughest elements with little-to-no corrosion.

Every Serpent is Made in the USA and includes a FlexTech KYDEX sheath for easy retention adjustability, as well as multiple friction offsets to eliminate blade rattle.

Thermal Diffusion Technology (TDT) - Toor Knives TDT blade treatment process includes the molecular reorganization of the lattice structures in the steel, which is achieved through multiple oxygen-free thermal normalizing cycles and a controlled rate of diffusion in the steel.

This is followed by a series of tempering procedures and a cryogenic freeze to harden the surface austenite, that ultimately relieves all of the natural stress in the steel, leaving you with a perfectly hardened blade.

Dynamic Fluting-
Toor Knives multiaxial handle carving process creates texture paths that flow seamlessly together and follow the natural positioning of the hand around the knife.

This has enabled us to finally conquer the age-old task of providing both comfort AND grip on a blade.

FlexTech Sheaths- Toor Knives precision mold all of there KYDEX sheaths with retention adjustability to optimize your gear modularity, which allows you to use one sheath for multiple applications.

MicraCoat- This series of proprietary thermal curing processes includes a multi-coat application that achieves maximum corrosion resistance and a minimal dimensional footprint.

The result is fewer blade scratches, additional corrosion resistance, and a thinner surface coat.


Click here for Ulticlip mounting options.

For best fit look at the following UltiClips

Ulticlip XL

Ulticlip Slim 3.3




Overall Length


8.25"
Blade Length3.75"
Handle Length4.5"
Handle MaterialG10
SteelCPM3V
Blade Thickness0.1875"
Blade Hardness59-61 Rockwell
Weight6.7 oz
Toor Knives Anaconda Toor knives designed the Field 2.0 with every day use in mind and it has quickly become known as the workhorse of our Outdoor Series. Its small size allows for all day carry comfort while having the capability to handle almost any task out on the trail Designed as a lightweight, traditional throwing tomahawk, our all-new Brawker features a skeletonized head and partial tang construction
Toor Knives Anaconda*
Our Price: $394.99
Toor Knives Field 2.0
Our Price: $399.99
Toor Knives Brawker
Our Price: $469.99
Sale Price: $399.99
You save $70.00!

Named in honor of a 2002 operation that took place in the War in Afghanistan, the Anaconda is considered a Toor heritage blade, by some.

Although strategically updated for 2021, Toor still designate this knife as both ‘Tactical’ and ‘Concealable’, as its streamlined outline continues to take up minimal space on your gear.

The Anaconda’s iconic ring measures 1 1/8”, which allows for an easy draw, with or without gloves, and it’s blade features a rounded convex edge that allows for smooth slices.

Toor signature snake scales handle minimizes the risk of the knife sliding out of your hand when working in wet conditions, while still maintaining smooth and comfortable contours if concealed against the body.

Constructed of CPM S35vn Steel, with a Shadow Black or Ranger Green KG Gunkote finish, the Anaconda is made to operate in nature’s toughest environments with little-to-no corrosion on the blade.

Each Anaconda is made here at the Toor manufacturing facility, in San Diego, CA and includes a black FlexTech KYDEX® sheath.

Thermal Diffusion Technology (TDT) - Our TDT blade treatment process includes the molecular reorganization of the lattice structures in the steel, which is achieved through multiple oxygen-free thermal normalizing cycles and a controlled rate of diffusion in the steel. This is followed by a series of tempering procedures and a cryogenic freeze to harden the surface austenite, that ultimately relieves all of the natural stress in the steel, leaving you with a perfectly hardened blade.


Dynamic Fluting- Our multiaxial handle carving process creates texture paths that flow seamlessly together and follow the natural positioning of the hand around the knife. This has enabled us to finally conquer the age-old task of providing both comfort AND grip on a blade.

FlexTech Sheaths- We precision mold all of our KYDEX® sheaths with retention adjustability to optimize your gear modularity, which allows you to use one sheath for multiple applications. Additionally, we use multiple friction offsets in the sheath to eliminate blade rattle.

MicraCoat- This series of proprietary thermal curing processes includes a multi-coat application that achieves maximum corrosion resistance and a minimal dimensional footprint. The result is fewer blade scratches, additional corrosion resistance, and a thinner surface coat.

Click here for Ulticlip mounting options.

For best fit look at the following UltiClips

Ulticlip XL

Ulticlip Slim 3.3

Overall Length8.25"
Blade Length3.75"
Handle Length4.5"
Handle MaterialG10
SteelCPM s35vn
Blade Thickness0.1875"
Blade Hardness59-61 Rockwell
Weight6.7 oz

Toor knives designed the Field 2.0 with every day use in mind and it has quickly become known as the workhorse of our Outdoor Series. Its small size allows for all day carry comfort, while having the capability to handle almost any task out on the trail.

The edge features a 2.75” straight for fine work, and a razor sharp 1.75” radius to the tip for traditional blade work. Its KG Gunkote finish provides excellent abrasion, chemical and impact resistance, and the blade shape allows for much more steel mass behind the edge, which translates to a longer sharpening life and edge impact resistance. A perfect 90-degree spine, from the tip all the way to the thumb jimping, provides more surface area for hammering and ferro rod sparking.

Additionally, every handle is lined with a polished copper accent and Toor’s proprietary Dynamic Fluting™ texture, providing smooth ergonomics in the hand, as well as grip when operating in wet environments. This design forces proper grip mechanics and concentrates all the pressure onto the apex of the blade edge, conquering the age-old task of offering both comfort AND grip. With a precision cut ¼” radius on each flute, and spiral rifling from end to end, each groove flows perfectly with the hand’s natural positioning.

Every Field 2.0 is Made in the USA and includes a genuine Hermann Oak saddle leather sheath.

Click here for Ulticlip mounting options.

For best fit look at the following UltiClips

Ulticlip XL

Ulticlip Slim 3.3


Overall Length8.75"
Blade Length4.5"
Handle Length4.25"
Handle MaterialWalnut Dynamic Fluting™
Liner0.035" Copper
SteelCPM 154
Blade Thickness0.1875"
Blade Hardness59-61 Rockwell
Weight6.8 oz
Designed as a lightweight, traditional throwing tomahawk, our all-new Brawker features a skeletonized head and partial tang construction. This allows for the majority of the weight to remain above the handle creating a rotation point higher on the neck of the 'hawk. The head features a large, traditional curved blade on one side and a small curved blade on the other, allowing both sides to be used for striking.

The Brawker is made from CPM 3V steel, allowing it to be thinner and lighter than most ‘hawks, but still strong enough to tackle striking tasks. It also features a corrosion-resistant black KG GunKote finish and is fitted with a smooth G10 handle for extra comfort in the hand.

Each Brawker is made entirely here in San Diego, CA by our talented manufacturing team and comes with a black KYDEX® sheath.



Overall Length 14.0"
Head Length 6.75"
Handle Length 10.5"
Handle Material G10
Steel CPM 3V
Blade Thickness 0.1875"
Hardness 58-61 Rockwell
Weight 15.8 oz
















Toor knives designed the Field 2.0 with every day use in mind and it has quickly become known as the workhorse of our Outdoor Series. Its small size allows for all day carry comfort while having the capability to handle almost any task out on the trail Introducing the Limited Edition Krypteia Arid, a unique take on one of our most popular SOF Series blades. Just when you thought we were hitting the doldrums of Spring, we’re pleased to announce the Signature Series collaboration between Toor Knives and Skallywag Tactical continues with the Fathom!
Toor Knives Fathom
Our Price: $544.99
Sale Price: $404.99
You save $140.00!

Toor knives designed the Field 2.0 with every day use in mind and it has quickly become known as the workhorse of our Outdoor Series. Its small size allows for all day carry comfort, while having the capability to handle almost any task out on the trail.

The edge features a 2.75” straight for fine work, and a razor sharp 1.75” radius to the tip for traditional blade work. Its KG Gunkote finish provides excellent abrasion, chemical and impact resistance, and the blade shape allows for much more steel mass behind the edge, which translates to a longer sharpening life and edge impact resistance. A perfect 90-degree spine, from the tip all the way to the thumb jimping, provides more surface area for hammering and ferro rod sparking.

Additionally, every handle is lined with a polished copper accent and Toor’s proprietary Dynamic Fluting™ texture, providing smooth ergonomics in the hand, as well as grip when operating in wet environments. This design forces proper grip mechanics and concentrates all the pressure onto the apex of the blade edge, conquering the age-old task of offering both comfort AND grip. With a precision cut ¼” radius on each flute, and spiral rifling from end to end, each groove flows perfectly with the hand’s natural positioning.

Every Field 2.0 is Made in the USA and includes a genuine Hermann Oak saddle leather sheath.

Click here for Ulticlip mounting options.

For best fit look at the following UltiClips

Ulticlip XL

Ulticlip Slim 3.3


Overall Length8.75"
Blade Length4.5"
Handle Length4.25"
Handle MaterialWalnut Dynamic Fluting™
Liner0.035" Copper
SteelCPM 154
Blade Thickness0.1875"
Blade Hardness59-61 Rockwell
Weight6.8 oz

Only 135 made world wide.

Introducing the Limited Edition Krypteia Arid, a unique take on one of our most popular SOF Series blades.

As a concealable blade with a low profile, MultiCam® Arid KYDEX® sheath, our Krypteia has a proven track record of versatility and protection. Whether being used as a policing tool on the streets, or tucked into the gear of a modern-day operator, this knife provides peace of mind as it continues to be one of our all-time best sellers.

Additionally, it’s fitted with a textured handle, includes a thumb ramp with zig-zag jimping for reverse drawing the blade. The blade is flat-ground almost all the way to the spine, which provides a razor edge and increases the sharpening life, with a false edge and added choil near the center of the blade mass.

Every Krypteia Arid is Made in the USA and includes a MultiCam® Arid KYDEX® sheath, which is compatible with any of our sheath mounts.

Overall Length 8.0"
Blade Length 4.0"
Handle Length 4.0"
Handle Material G10
Steel CPM S35VN
Blade Thickness 0.25"
Blade Hardness 59-61 Rockwell
Weight 7.2 oz


















Just when you thought we were hitting the doldrums of Spring, we’re pleased to announce the Signature Series collaboration between Toor Knives and Skallywag Tactical continues with the Fathom!

Another iconic knife that combines Toor’s premium bladesmithing capabilities with Skallywag’s combative and application competence, the Limited Edition Fathom was designed and built with precision and practicality to tackle jobs reserved for heavy blades. With an overall length of 11.5" and weight of 12.2 oz., the Fathom isn’t for Landlubbers! This unique, state-of-the-art knife combines aspects of traditional Wharncliffe, Sheepsfoot and Drop Point blade shapes and is made from D2 steel, which has high wear and abrasion resistant properties.

Depending on the colorway chosen, the Fathom features either G10 or ebony handles. The textured scales, combined with our signature thumb jimping, allow the knife to sit ultra-comfortably in hand, providing sound peace of mind. Lastly, the 0.25" blade thickness gives you a sturdy and reliable tool that will perform tough tasks admirably in even the most challenging conditions. Savvy?

Made entirely here in San Diego, CA by the skilled and talented Toor Manufacturing team, the Fathom is incredibly solid and robust, and each one includes a Black FlexTech KYDEX® sheath.

Overall Length 11.5"
Blade Length 6.5"
Handle Length 5.0"
Handle Material G10 or Ebony
Steel D2
Blade Thickness 0.25"
Blade Hardness 57-59 Rockwell
Weight 12.2 oz

















































Toor Knives Darter Vapor Toor Knives Merchant 2.0 T Toor Knives Merchant 2.0 S
Toor Knives Darter Vapor
Our Price: $419.99
Toor Knives Merchant 2.0 T
Our Price: $429.99
Toor Knives Merchant 2.0 S
Our Price: $429.99

(1)

We're proud to introduce the latest iteration of our collaboration with Haley Strategic Partners on one of the most unique fighting blades to ever hit the market – the Darter Vapor! Combining Travis Haley’s tactical experience and expertise with Toor’s premium bladesmithing capabilities, this knife features iconic reverse serrations on the spine, which offer an extremely sharp solution to fighting with the back of the knife while avoiding the restrictions on a double-edged blade.

Constructed out of CPM S35VN steel and heat-treated to approximately 60 Rockwell, the Darter is stout enough to tackle any task. We've updated the Vapor version with a subtle Dragonfly wing pattern engraved on the blade over the Black KG Gunkote. This new variant of the knife is also fitted with a Vapor Grey G10 handle with black liner. It is machined with a texture to match the Darter Dragonfly’s wing pattern, while simultaneously providing excellent grip when operating in wet conditions.

The knife’s midsize permits easy placement on your gear without compromising real estate, and each Darter Vapor includes a MultiCam® Black Toor Knives KYDEX® sheath, featuring a retention adjustability screw and friction offset to reduce blade rattle inside the sheath. Complementing the sheath is mounting hardware and an UltiClip Slim 3.3 mount and rounding out the Darter package is a laser-cut loop which has been designed to sandwich your sheath into your gear.

Several other key features of this blade include a retention lanyard hole, thumb jimping on the spine and butt end of the blade, stainless steel torx handle screws, a KG Gunkote spray finish, and both companies' logos laser-engraved on the blade. Last, but not least, every single Darter is finished with an individual serial number marking a piece of history from this iconic partnership.

These knives are tools of a warrior, works of art, and extremely collectible.

Overall Length 8.5"
Blade Length 4.25"
Handle Length 4.25"
Handle Material G10
Steel CPM S35VN
Blade Thickness 0.1875"
Blade Hardness 59-61 Rockwell
Weight 5.3 oz

































Following the exact profile of its predecessor, the Merchant 2.0 has been updated with slimmer handles for less weight, domed hardware, and a deep carry pocket clip. This blade was originally designed as the the ultimate everyday carry pocket workhorse. This version of the Merchant folder has a Tanto blade shape, which provides razor sharp straight edges, and an extremely strong tip. Every Merchant T is made entirely here at Toor Knives, in San Diego, CA.

With an extra-high bevel grind that provides plenty of sharpening life, this frame lock folding knife uses premium 6al-4v titanium, precision-machined handle scales with a CPM S35VN blade. We custom-make every screw and back spacer in our manufacturing facility, also using 6al-4v titanium. The blade rides on phosphor bronze washers, giving it a smooth, controlled folding action, and our signature deep carry titanium pocket clips allow the knife to sit lower in the pocket for extra comfort when carrying.

MechanismFrame Lock
Overall Length 8.0"
Blade Length 3.75"
Handle Length 4.25"
Blade Thickness 0.125"
Overall Thickness 0.4"
Weight 3.6 oz
Blade Hardness 59-61 Rockwell
Steel CPM S35VN
Handle Material 6AL-4V Titanium
Hardware 6AL-4V
Screw SizeTorx 8
























Following the exact profile of its predecessor, the Merchant 2.0 has been updated with slimmer handles for less weight, domed hardware, and a deep carry pocket clip. This blade was originally designed as the ultimate everyday carry pocket workhorse. This version of the Merchant folder has a standard, curved blade shape that allows for smooth cutting and is made entirely here at Toor Knives, in San Diego, CA.

With an extra-high bevel grind that provides plenty of sharpening life, this frame lock folding knife uses premium 6al-4v titanium, precision-machined handle scales with a CPM S35VN blade. We custom-make every screw and back spacer in our manufacturing facility, also using 6al-4v titanium. The blade rides on phosphor bronze washers, giving it a smooth, controlled folding action, and our signature deep carry titanium pocket clips allow the knife to sit lower in the pocket for extra comfort when carrying.

The Merchant 2.0 S comes in a Black KG Gunkote handle with Stone blade, or a Bronze anodized handle with Black Oxide blade.

**Please note that this deep carry pocket clip will not fit previous versions of the Merchant

Mechanism Frame Lock
Overall Length 8.0"
Blade Length 3.75"
Handle Length 4.25"
Blade Thickness 0.125"
Overall Thickness 0.4"
Weight 3.6 oz
Blade Hardness 59-61 Rockwell
Steel CPM S35VN
Handle Material 6AL-4V Titanium
Hardware 6AL-4V
Screw Size Torx 8















































The XT1 Bravo is our latest variant of our largest frame lock folding knife. With several updates to its original predecessor the XT1 Alpha, the Bravo maintains its origins as the ultimate heavy duty folding knife for tactical and field environments. The XT1 Bravo is our latest variant of our largest frame lock folding knife. With several updates to its original predecessor the XT1 Alpha, We’ve always backed the “Business in the front, party in the back” philosophy, so we’re proud to introduce the Mullet!
Toor Knives XT1 Bravo Carbon Fiber
Our Price: $719.99
Sale Price: $429.99
You save $290.00!
Toor Knives XT1 Bravo G10
Our Price: $679.99
Sale Price: $429.99
You save $250.00!
Toor Knives Mullet*
Our Price: $432.99

The XT1 Bravo is our latest variant of our largest frame lock folding knife. With several updates to its original predecessor the XT1 Alpha, the Bravo maintains its origins as the ultimate heavy duty folding knife for tactical and field environments. We've introduced the Hybrid Handle to the Bravo, allowing for different textures and grip options for any mission. In addition to the new handle grips, the XT1 Bravo includes a stainless steel liner for reinforced strength in the frame, as well as a stone wash, polished locking side to reduce surface scratching.

Available with a Carbon Fiber Hybrid Handle, this full-size frame lock folding knife pays homage to the foundation Toor Knives was built on and achieves our goal of creating a pocketknife that could tackle the challenging tasks within tactical and military settings. The XT1’s hardened steel lockbar insert with overtravel stop reduces wear and tear on the blade lock interface, which maintains lock longevity and creates a much larger surface area engagement, mitigating all open and closed blade movement. The additional mass to the handle allows for a titanium billet milled clip to sit in a machined recess, completely improving the overall durability of the pocket clip.

Additionally, the full Carbon Fiber backspacer greatly improves the rigidity of all the frame body screws, relieves the stress from traditional threaded standoffs and is finished with a large loop that features jimping for safety cords and lanyards. The XT1’s iconic shaped recurve blade is 0.157" (5/32) thick, and its hand-ground bevel stands about 1.0” tall. The initial edge is left slightly thicker prior to sharpening, allowing for a much larger final edge and more mass. This critical feature allows for a longer edge life, as well as a more user-friendly grind to resharpen in the field.

Each XT1 is proudly produced 100% here in San Diego, CA by our skilled and talented manufacturing team, and comes with a custom S3 waterproof case.

Mechanism Frame Lock
Overall Length 8.0"
Blade Length 3.25"
Handle Length 4.75"
Blade Thickness 0.157"
Overall Thickness 0.6"
Weight 5.9 oz
Blade Hardness 58-61 Rockwell
Steel CPM S35VN
Handle Material
CF + Stainless Steel / 6AL-4V Titanium
Backspacer Material Carbon Fiber
Hardware 6AL-4V Titanium
Screw Size Torx 8
Action Phosphor Bronze Washers
Lockbar Insert CPM S35VN
Clip
6AL-4V Titanium

























The XT1 Bravo is our latest variant of our largest frame lock folding knife. With several updates to its original predecessor the XT1 Alpha, the Bravo maintains its origins as the ultimate heavy duty folding knife for tactical and field environments. We've introduced the Hybrid Handle to the Bravo, allowing for different textures and grip options for any mission. In addition to the new handle grips, the XT1 Bravo includes a stainless steel liner for reinforced strength in the frame, as well as a stone wash, polished locking side to reduce surface scratching.

Available with a G10 Hybrid Handle, this full-size frame lock folding knife pays homage to the foundation Toor Knives was built on and achieves our goal of creating a pocketknife that could tackle the challenging tasks within tactical and military settings. The XT1’s hardened steel lockbar insert with overtravel stop reduces wear and tear on the blade lock interface, which maintains lock longevity and creates a much larger surface area engagement, mitigating all open and closed blade movement. The additional mass to the handle allows for a titanium billet milled clip to sit in a machined recess, completely improving the overall durability of the pocket clip.

Additionally, the full G10 backspacer greatly improves the rigidity of all the frame body screws, relieves the stress from traditional threaded standoffs and is finished with a large loop that features jimping for safety cords and lanyards. The XT1’s iconic shaped recurve blade is 0.157" (5/32) thick, and its hand-ground bevel stands about 1.0” tall. The initial edge is left slightly thicker prior to sharpening, allowing for a much larger final edge and more mass. This critical feature allows for a longer edge life, as well as a more user-friendly grind to resharpen in the field.

Each XT1 is proudly produced 100% here in San Diego, CA by our skilled and talented manufacturing team.

Mechanism Frame Lock
Overall Length 8.0"
Blade Length 3.25"
Handle Length 4.75"
Blade Thickness 0.157"
Overall Thickness 0.6"
Weight 5.9 oz
Blade Hardness 58-61 Rockwell
Steel CPM S35VN
Handle Material
G10 + Stainless Steel / 6AL-4V Titanium
Backspacer Material G10
Hardware 6AL-4V Titanium
Screw Size Torx 8
Action Phosphor Bronze Washers
Lockbar Insert CPM S35VN
Clip
6AL-4V Titanium














































We’ve always backed the “Business in the front, party in the back” philosophy, so we’re proud to introduce the Mullet! This latest edition to our best-selling SOF Series is designed to have as much mass as possible in a shorter footprint so it can be carried horizontally or “scout carry” mid-back.

Made from CMP 154 steel, this blade features a short swerve grind, which reinforces the tip and minimizes resistance when penetrating tough surfaces. With an overall length of 8.5”, a weight of 7.5 oz. and blade thickness of 0.1875”, the Mullet successfully fills the gap in our assortment, as a midsized, fixed blade, slightly larger and heavier than our Krypteia. The Mullet is fitted with Black G10 handles and a Toor Knives signature texture, leaving large enough flutes for an extremely comfortable in-hand grip.

If you didn’t get an invite to the party, no worries! Modern problems, require modern solutions, so let yourself in by using the Breacher Ball™! The 0.1875” tungsten carbide ball allows maximum glass-breaking ability and is press-fit into the hardened tang of the Mullet. It is effective on standard, tempered and safety glass and is by far the most comfortable and effective breacher on the market.

Each Mullet is made here in San Diego, CA by our skilled and talented manufacturing team and comes with a black KYDEX® sheath.

Overall Length 8.5"
Blade Length 4.0"
Handle Length 4.5"
Handle Material G10
Steel CPM 154
Blade Thickness 0.1875"
Blade Hardness 59-61 Rockwell
Weight 7.5 oz