How do I clean and care for my Viktos gear?

• APPAREL
  • GENERAL CARE
    For apparel (outerwear, t-shirts, hoodies, pants, and shorts) detailed cleaning instructions can be found on the product label inside most garments. In addition to the instructions we provide, specific instructions by the manufacturer of technical fabrics should also be followed when applicable. In order to maximize the garment’s performance and lifespan, we offer these suggestions:
  • PRE-WASH PREPARATION
    We suggest closing all zippers, emptying all pockets, sealing all openings, and turning garments inside out before washing. As stated above, please follow the washing instructions that come printed on the interior label of your garment.
  • SPECIALTY FABRICS
    Some technical fabrics require specific products capable of cleaning without decreasing the fabrics performance. Unlike ordinary laundry detergents, these specialty products leave little to no residue.
  • LEATHER
    To prevent the natural aging of leather, we recommend treating all leather products with a cream or water based wax treatment. Please note that leather treatments may alter the leather’s original appearance, however, it will not affect the performance properties of the leather.
  • DURABLE WATER REPELLENT (DWR)
    Almost all of our waterproof and water-resistant gear is treated with a Durable Water Repellent (DWR) coating. As you wear and wash your gear, this coating gradually fades and eventually it must be reapplied. If your product no longer beads up when exposed to water, it’s time to treat your garment with a DWR finish.
    There are a variety of good DWR products on the market. Generally speaking, we suggest using a spray-on DWR treatment when applying between washes, and wash-in DWR treatments when laundering your garment. We also urge you to spot clean any necessary areas before applying DWR. Be sure to target seams and high-impact areas when applying. Finally, hang dry your garment for best results.
• GLOVES
  • GENERAL CARE
    For gloves, we recommend hand washing your gloves in cold water with mild laundry detergent or dish soap. Do not use bleach or solvents as they can damage your gloves. After washing, gloves should be air-dried at room temperature without the aid of an external heat source.
  • SPECIALTY FABRICS
    Some technical fabrics require specific products capable of cleaning without decreasing the fabrics performance. Unlike ordinary laundry detergents, these specialty products leave little to no residue.
  • LEATHER
    To prevent the natural aging of leather, we recommend treating all leather products with a cream or water based wax treatment. Please note that leather treatments may alter the leather’s original appearance, however, it will not affect the performance properties of the leather.
  • TEXTILE MATERIALS
    Textiles and fabrics can degrade over time if not properly cleaned or cared for on a regular basis. To extend the life of your gloves, we recommend following the general care instructions above.
• FOOTWEAR
  • GENERAL CARE
    We recommend cleaning your footwear with a soft, wet brush and clean water to remove dirt and mud. Viktos boots, shoes and sandals should then be air-dried at room temperature without the aid of an external heat source. Footwear should never be machine washed in any way.
  • LEATHER
    To prevent the natural aging of leather, we recommend treating all leather products with a cream or water based wax treatment. Please note that leather treatments may alter the leather’s original appearance, however, it will not affect the performance properties of the leather.
  • TEXTILE MATERIALS
    Textiles and fabrics can degrade over time if not properly cleaned or cared for on a regular basis. To extend the life of the products, we recommend following the general care instructions above.
  • INTERIOR
    Interior liners, insoles, and midsoles should be kept clean and free of dirt and mud to prevent bacteria build up and premature aging.
  • LACES
    Laces have the potential to be damaged over the life of the product and should be replaced accordingly.

Where are your products made?
VIKTOS is a USA based company, comprised of a small group of dedicated individuals, many of whom are veterans. Our business operations are based in our Wisconsin headquarters. We manufacture the majority of our products in Asia. While we dream of a day when we can produce more of our product line at home, the lack of domestic technical softgoods manufacturing capabilities, combined with very real economic factors, currently precludes that choice. We believe in our country and continue to explore every manner of expanding our domestic softgoods manufacturing percentage.

Main Compartment -
Total Capacity -
Weight -

Multiply colors available!

Designed to address the needs for personal protection, the Counteract™ slingbag represents the ultimate off-body carry option. The Counteract is built around a slide-out hook & loop tray, allowing custom loadouts, multiple holster options, and rapid access to your firearm. The durable coated-ripstop chassis is weather & stain resistant and features magnetic break-away flaps for clean draws. Internally, the slingbag features hook & loop panels allowing for attachment of the included Hookie™ holster and spare magazine carrier. Side slash pockets allow quick EDC access, and the rear pocket fits IIIA soft armor (sold separately). The Counteract™ series is designed by U.S. veterans and tested by our team of CCW firearms trainers.

Everyone needs a favorite hoodie. A trusted pull-over that can take the nip out of a fall range day, or stand a beach party mid watch. Built of a 12oz Cotton/Poly athletic chassis, the FALLBACK™ Shooter provides snuggly blanket sweatshirt warmth, but offers the heathered steeze of a steely-eyed lady killer.

- 12oz mid-weight fleece chassis
- 80% cotton / 20% polyester
- Relaxed men's fit
- Ribbed elastic cuff and waist
- U.S. veteran designed & developed
- 1-year workmanship & materials warranty

TACTICAL APPLICATION IN A LO-VIS SILHOUETTE

Whether operating undercover or just exercising your daily carry duty, the Gunvent Hoodie was designed as your primary fleece for concealed-carry application. The chassis consists of a mid-weight cotton/poly fleece, perfect for cool-weather wear. This material is not only comfortable but also durable for many seasons of daily wear. Gunvents integrated into the side seams allow easy access to waistband carried pistols or other EDC. Finally, the relaxed men's fit reduces firearm printing while allowing freedom of movement to a shooter's stance.

Multiply colors available!

Main Compartment -
Total Capacity -
Weight -

Multiply colors available!