You are here:Home > Filters > Size > S
We found 30 results matching your criteria.
Sort By:
Page of 1
Kore Essentials Belt Protector Duty gear defined by its low-profile silhouette, the Viktos OPERATUS virtually eliminates trigger housing interference issues, allowing incredible hand-feel and dexterity. Every operator needs a baselayer they can depend on to perform in any condition. Constructed using VaporCore™, powered by 37.5® technology, the short sleeve Full Guard Performance Shirt
Vertx Full Guard Performance Short Sleeve Shirt
Our Price: $34.99
Sale Price: $39.99

  • Includes: Black Belt Protector Sleeve

    • KORE's Belt Protector Sleeve slides onto your belt to protect it from the wear and tear of binding holsters, metal clips and other sharp edges.
    • Fits 1.5" Gun Belts & 1.75" Garrison Belts
    • The snug fitting, heavy-duty, black stretch material wraps the belt in a protective layer.
















.

Microclimate Management in Motion

Every operator needs a baselayer they can depend on to perform in any condition. Constructed using VaporCore™, powered by 37.5® technology, the short sleeve Full Guard Performance Shirt provides unmatched moisture and heat management no matter the environment. Whether you’re putting in work at the range or in the gym the shirt’s raglan style sleeve, semi-compression fit and long-line hem ensure maximum mobility and coverage while on the move. Built for the Prepared Professional™, the Full Guard Performance Shirt is more than the average baselayer.

Features:

  • Semi-compression fit comfortably skims the body without squeezing
  • Longline hem stays tucked in during every activity level
  • Raglan style sleeves reduce shoulder restriction for added comfort and mobility
  • Easily layers under low-profile or overt pieces to increase performance in the field
  • Gusseted underarm provides increased range of motion
  • Hidden mini stash pocket lets you pre-load items up to 2” long

Construction:

  • Stretch flatlock sleeve and main body seams
  • Tonal branding reduces visual profile
  • Soft, stitchless printed size label
  • 4-way stretch knit fabric

Fabric and Technology:

  • 65 oz. 58% Polyester, 42% 37.5® Polyester
  • VaporCore™, powered by 37.5® technology, promotes active cooling and rapid drying
Every operator needs a baselayer they can depend on to perform in any condition. Constructed using VaporCore™, powered by 37.5® technology, the short sleeve Full Guard Performance Shirt The Viktos LEO DUTY GLOVES were designed for those of you on the front lines of patrol and unrest. Viktos Brand Canada The Viktos LEO vented duty glove capitalizes on the same tactical chassis as the original, but adds a compliment of breathable engineered perforation to reduce heat for summer service.
Vertx Full Guard Performance Long Sleeve Shirt
Our Price: $34.99
Sale Price: $39.99
Viktos LEO Duty Glove
Our Price: $44.99

Microclimate Management in Motion

Every operator needs a baselayer they can depend on to perform in any condition. Constructed using VaporCore™, powered by 37.5® technology, the short sleeve Full Guard Performance Shirt provides unmatched moisture and heat management no matter the environment. Whether you’re putting in work at the range or in the gym the shirt’s raglan style sleeve, semi-compression fit and long-line hem ensure maximum mobility and coverage while on the move. Built for the Prepared Professional™, the Full Guard Performance Shirt is more than the average baselayer.

Features:

  • Semi-compression fit comfortably skims the body without squeezing
  • Longline hem stays tucked in during every activity level
  • Raglan style sleeves reduce shoulder restriction for added comfort and mobility
  • Easily layers under low-profile or overt pieces to increase performance in the field
  • Gusseted underarm provides increased range of motion
  • Hidden mini stash pocket lets you pre-load items up to 2” long

Construction:

  • Stretch flatlock sleeve and main body seams
  • Tonal branding reduces visual profile
  • Soft, stitchless printed size label
  • 4-way stretch knit fabric

Fabric and Technology:

  • 65 oz. 58% Polyester, 42% 37.5® Polyester
  • VaporCore™, powered by 37.5® technology, promotes active cooling and rapid drying

Main Compartment -
Total Capacity -
Weight -

.
The WARTORN™ glove was designed to overcome these points of gear failure, while adding additional service and functionality. The thumb valleys are reinforced with Combative Leather™ to defeat the aggressive checkering of modern polymer handguns The LEO™ DUTY GLOVES were designed for those of you on the front lines of patrol and unrest. The Long Sleeve TACLITE® Pro Shirt remains one of our most popular designs, crafted from our proprietary 4 oz. poly/cotton TACLITE® ripstop fabric, and Teflon® treated for stain, liquid, and soil resistance.
Viktos Wartorn Glove
Our Price: $64.99
Sale Price: $49.99
You save $15.00!
Viktos LEO Riot Glove
Our Price: $72.99
5.11 Taclite pro L/S Shirt *
Our Price: $99.99
Sale Price: $74.99
You save $25.00!
. . The Long Sleeve TACLITE® Pro Shirt remains one of our most popular designs, crafted from our proprietary 4 oz. poly/cotton TACLITE® ripstop fabric, and Teflon® treated for stain, liquid, and soil resistance.


  • Built from 4.4 oz. TACLITE® poly/cotton ripstop fabric
  • Long sleeves offer adjustable cuffs and sleeve-keeper
  • Gusseted underarms for mobility
  • Teflon® treated for stain, soil, and liquid resistance
  • Twin chest pockets with pen slots
  • Epaulettes and badge holder included
  • Cape-back vent
  • Melamine buttons won't burn, crack, or melt
  • Bartacking at all stress points
  • Locker loop on inner collar
  • Lightweight, durable, comfortable
  • Enhanced ventilation for warm climates
  • Quick dry, moisture wicking action
  • If your occupation demands exposure to the elements, consider the Viktod LEOâ„¢ INSULATED GLOVE as your steadfast cold weather partner. The Condor Short Sleeve Combat Shirt is an alternative to the traditional polo shirt which can be used as relaxed duty uniform or a hot weather range shirt. Condor Combat Shirt Canada
    . The Condor Short Sleeve Combat Shirt is an alternative to the traditional polo shirt which can be used as relaxed duty uniform or a hot weather range shirt. The short sleeve design made with moisture wicking, lightweight, and breathable material will keep you cool and dry in the hottest environments plus its modified raglan cut sleeves for improved range of motion.

    • Raglan cut sleeves for improved range of motion
    • Mesh underarm panel to increase ventilation
    • Mesh lined collar
    • Two bicep pockets with YKK zipper closures
    • Two upper arm patch panels
    • Moisture wicking
    • Anti-static
    • Anti-Microbial and Odor-Control with Charcoal infused natural fiber
    The Condor Combat Shirt is what everyone has been asking for. Fully functional and comfortably fit, our signature Condor combat shirt is ready to go with you wherever you're needed.

    The raglan-cut sleeves provide improved range of motion while the mesh underarm panels provide natural ventilation for better breathability.

    This Condor shirt features anti-static and anti-microbial finishes on the chest along with moisture-wicking material, which helps to prevent dampness and odors.

    Several built-in pockets are essential for keeping important tools and accessories within reach.

    With so many features designed to enhance performance and comfort, it's no surprise that this is one of our most popular Condor tactical shirts.

    The Condor combat shirt is ready to tackle any challenge in the field.

    • Raglan cut sleeves for improved range of motion
    • Mesh underarm panel to increase ventilation
    • Mesh lined collar
    • Two bicep pockets with YKK zipper closures
    • Two upper arm patch panels
    • Elbow pad pockets
    • Reinforced elbow
    • Hook and loop cuff adjustment
    • Moisture wicking
    • Anti-static
    • Anti-Microbial and Odor-Control with Charcoal infused natural fiber
    Kore Essentials G1 Garrison Condor Alpha Fleece Kore Essentials X1 Gun Belt Black
    Condor Alpha Fleece
    Our Price: $89.99
    Kore Essentials X1 Gun Belt
    Our Price: $89.99

    (1)

    • Best fitting, most comfortable EDC gun belt you’ll ever wear. Precise, secure fit provides a smooth, fast draw every time.
    • NO Belt Holes. Instead Kore concealed carry belts use a hidden track with 40+ sizing positions, to adjust ¼” at a time. It's 800% more adjustable vs. traditional gun belt with holes.
    • Designed to support small to medium weight firearms (4 lbs. max). Classic buckle designs available, because no one needs to know you’re carrying.
    • Top Grain Leather with our proprietary Reinforced Power-Core™center for support & stiffness. Buckle styles differ but mechanism and function is the same.
    • Leather Gun Belts are 1.5" wide and One-Size to fit any waist size from 24” up to 44” (XL up to 54"). Belt is secured to buckle using large teeth clamp and 2 set screws with hex wrench (included).


    Kore Essentials offers a wide variety of heavy-duty ratcheting buckles (4.5 cm x 6 cm) designed to work with KE gun belts. Buckles are constructed of either high-grade, zinc alloy, with an electroplated gunmetal or black powder-coat finish, or solid stainless steel (all contain nickel). The buckle mechanism features our Kore designed and patented, spring-loaded system that's durable, reliable and won't stick.


    All gun buckles enlist the use of 2 set screws (M4 x 7 mm length), and a row of teeth, to securely hold the belts into the buckles. This upgraded system is extremely secure. An Allen wrench is included (2 mm).

    Gun Belts

    Kore EDC gun belts feature a 10” virtually indestructible, hidden track with 40+ size positions to adjust with. Now you can precisely adjust your gun belt in small 1/4” increments for a perfect fit. It's the ultimate concealed carry belt for work, play, the range, or even out on the town.


    All Kore Essentials gun belts (leather & tactical) feature our Proprietary Reinforced Power-Core™ center. This unique blend makes our belts sturdy and stiff enough to support your firearm and gear with out any sag, yet flexible enough to sit, walk, or move in all day. It's the most secure, comfortable gun belt you will ever wear.


    EDC Leather & Tactical Gun Belts
    are 1.5" wideand 5 mm thick, and designed for IWB, OWB and Appendix carry situations. EDC Belts come in regular sizes (24" to 54") and XL sizes to fit waist up to 72". Check sizes when ordering.


    Garrison Leather and Tactical Belts
    are 1.75" wide belts and designed for the range, excursions, training or law enforcement. Due to there width they are not ideal for IWB or Appendix. Garrison Belts come in one size that fits any waist from 24" up to 54". Check sizes when ordering.


    Leather
    gun belts are constructed using 2 full-length pieces of Full Grain Buffalo leather or Top Grain leather and designed to support loads up to a maximum of 6 lbs. for Full Grain and 4lbs. for Top Grain (that's total gear weight). These belts are not designed to serve as tactical or duty belts, but rather EDC belts for work, play, dress, casual and a night out on the town.

    Kore nylon web tactical belts are stiffer and more rigid than our leather gun belts, and intended to support heavier loads and more gear. Constructed using Nylon Web outer layer (rated to 500 lbs.), Reinforced Power-Core Center™ and Super-Fiber inner liner for added strength and durability. Tactical belts are designed to support holstered firearms or gear up to a maximum of 8 lbs. (total weight). Due to the stiffness of our tactical belts they include a Belt Keeper to keep the belt tip flush with your pants.

    NotGun buckles and belts are NOT interchangeable with any of our Classic Fashion buckles or belts. EDC Gun belts are wider and thicker than our fashion belts. If a particular belt color or style does not appear in the selection menu we may be temporarily sold ou Includes: X1 Style Gun Buckle & Black Top Grain Leather Reinforced Belt [hex wrench & set screws]

    Gun belts are ONE-SIZE and FIT ANY WAIST from 24” up to 44" [XL & Tactical belts up to 54"]
    Here’s how to trim your new belt for a perfect fit. It’s easy and only takes a minute to do.

    1 - On the back of the belt we printed a sizing ruler. Locate your pant size on the ruler - ADD 4 inches and CUT - using sharp, heavy-duty scissors.

    2 - For example, if your pant size is 32” – cut the belt at 36” mark. If your pant size is is close to the maximum – do NOT cut the belt. Proceed to step 3

    3 - Using the wrench that is included, loosen the screws on the back of the buckle.

    4 - Insert cut or blunt end of belt into buckle teeth and clamp down firmly. It’s OK to use force if needed (use tabletop for leverage) - the buckle won’t break.

    5 - Tighten the screws until they are flush with the buckle. You will get resistance.

    6 - Feed belt around your waist (L to R), thru buckle and the first belt loop. Pull until belt feels snug

    7 - Ideally, your belt tip should extend beyond the first belt loop by 2-3 inches. If your belt is too long – just remove the buckle and trim off one inch at a time until the desired length is achieved. Cut with Caution.
    The Condor Alpha Fleece is designed to be lightweight while providing breathability, comfort, and warmth.

    Equipped with abrasion resistant collar and elbows, and plenty pockets for storage, it is perfect for field operation.

    The Condor Alpha fleece is perfect for harsh winter days just pull the drawstring waistband and put it on under your tactical parka police uniform.

    Even on warmer days this tactical fleece is lightweight enough to wear all day and cut the cold wind.

    The outer shell is made from 100% polyester, super fine fleece with oxford reinforcement.

    The interior lining is laminated polyester netting fabric.

    The Condor Alpha Fleece has tons of pockets for your EDC including a vertical chest pocket, two slash hand pockets and shoulder pockets


    • Reinforced collar, shoulder, and forearm
    • Vertical chest pocket
    • Two slash hand pockets
    • Upper arm pocket
    • Two inch extendible sleeve with thumb-hole
    • Two upper arm patch panels
    • Full front center zipper with dual sliders
    • Drawstring waistband

    • Best fitting, most comfortable EDC gun belt you’ll ever wear. Precise, secure fit provides a smooth, fast draw every time.
    • NO Belt Holes. Instead Kore concealed carry belts use a hidden track with 40+ sizing positions, to adjust ¼” at a time. It's 800% more adjustable vs. traditional gun belt with holes.
    • Designed to support small to medium weight firearms (4 lbs. max). Classic buckle designs available, because no one needs to know you’re carrying.
    • Top Grain Leather with our proprietary Reinforced Power-Core™center for support & stiffness. Buckle styles differ but mechanism and function is the same.
    • Leather Gun Belts are 1.5" wide and One-Size to fit any waist size from 24” up to 44” (XL up to 54"). Belt is secured to buckle using large teeth clamp and 2 set screws with hex wrench (included).


    Kore Essentials offers a wide variety of heavy-duty ratcheting buckles (4.5 cm x 6 cm) designed to work with KE gun belts. Buckles are constructed of either high-grade, zinc alloy, with an electroplated gunmetal or black powder-coat finish, or solid stainless steel (all contain nickel). The buckle mechanism features our Kore designed and patented, spring-loaded system that's durable, reliable and won't stick.


    All gun buckles enlist the use of 2 set screws (M4 x 7 mm length), and a row of teeth, to securely hold the belts into the buckles. This upgraded system is extremely secure. An Allen wrench is included (2 mm).

    Gun Belts

    Kore EDC gun belts feature a 10” virtually indestructible, hidden track with 40+ size positions to adjust with. Now you can precisely adjust your gun belt in small 1/4” increments for a perfect fit. It's the ultimate concealed carry belt for work, play, the range, or even out on the town.


    All Kore Essentials gun belts (leather & tactical) feature our Proprietary Reinforced Power-Core™ center. This unique blend makes our belts sturdy and stiff enough to support your firearm and gear with out any sag, yet flexible enough to sit, walk, or move in all day. It's the most secure, comfortable gun belt you will ever wear.


    EDC Leather & Tactical Gun Belts
    are 1.5" wideand 5 mm thick, and designed for IWB, OWB and Appendix carry situations. EDC Belts come in regular sizes (24" to 54") and XL sizes to fit waist up to 72". Check sizes when ordering.


    Garrison Leather and Tactical Belts
    are 1.75" wide belts and designed for the range, excursions, training or law enforcement. Due to there width they are not ideal for IWB or Appendix. Garrison Belts come in one size that fits any waist from 24" up to 54". Check sizes when ordering.


    Leather
    gun belts are constructed using 2 full-length pieces of Full Grain Buffalo leather or Top Grain leather and designed to support loads up to a maximum of 6 lbs. for Full Grain and 4lbs. for Top Grain (that's total gear weight). These belts are not designed to serve as tactical or duty belts, but rather EDC belts for work, play, dress, casual and a night out on the town.

    Kore nylon web tactical belts are stiffer and more rigid than our leather gun belts, and intended to support heavier loads and more gear. Constructed using Nylon Web outer layer (rated to 500 lbs.), Reinforced Power-Core Center™ and Super-Fiber inner liner for added strength and durability. Tactical belts are designed to support holstered firearms or gear up to a maximum of 8 lbs. (total weight). Due to the stiffness of our tactical belts they include a Belt Keeper to keep the belt tip flush with your pants.

    NotGun buckles and belts are NOT interchangeable with any of our Classic Fashion buckles or belts. EDC Gun belts are wider and thicker than our fashion belts. If a particular belt color or style does not appear in the selection menu we may be temporarily sold ou Includes: X1 Style Gun Buckle & Black Top Grain Leather Reinforced Belt [hex wrench & set screws]

    Gun belts are ONE-SIZE and FIT ANY WAIST from 24” up to 44" [XL & Tactical belts up to 54"]
    Here’s how to trim your new belt for a perfect fit. It’s easy and only takes a minute to do.

    1 - On the back of the belt we printed a sizing ruler. Locate your pant size on the ruler - ADD 4 inches and CUT - using sharp, heavy-duty scissors.

    2 - For example, if your pant size is 32” – cut the belt at 36” mark. If your pant size is is close to the maximum – do NOT cut the belt. Proceed to step 3

    3 - Using the wrench that is included, loosen the screws on the back of the buckle.

    4 - Insert cut or blunt end of belt into buckle teeth and clamp down firmly. It’s OK to use force if needed (use tabletop for leverage) - the buckle won’t break.

    5 - Tighten the screws until they are flush with the buckle. You will get resistance.

    6 - Feed belt around your waist (L to R), thru buckle and the first belt loop. Pull until belt feels snug

    7 - Ideally, your belt tip should extend beyond the first belt loop by 2-3 inches. If your belt is too long – just remove the buckle and trim off one inch at a time until the desired length is achieved. Cut with Caution.
    Kore Essentials X5 Gun Belt is now in Canada, Shop at Tetragon for all your Kore Essential belt needs. feature Power-Core Reinforced Center, hidden Track 40+ micro size positions. Kore Essentials X3 Leather Gun Belt is now in Canada, Shop at Tetragon for all your Kore Essential belt needs. feature Power-Core Reinforced Center, hidden Track 40+ micro size positions. Kore Essentials X1 Black Leather Gun Belt is now in Canada, Shop at Tetragon for all your Kore Essential belt needs. Kore Gun Belts (1.5” wide) feature Power-Core Reinforced Center, hidden Track 40+ micro size positions.
    Kore Essentials X5 Gun Belt
    Our Price: $89.99

    (1)
    Kore Essentials X3 Gun Belt
    Our Price: $89.99

    (1)

    • Best fitting, most comfortable EDC gun belt you’ll ever wear. Precise, secure fit provides a smooth, fast draw every time.
    • NO Belt Holes. Instead Kore concealed carry belts use a hidden track with 40+ sizing positions, to adjust ¼” at a time. It's 800% more adjustable vs. traditional gun belt with holes.
    • Designed to support small to medium weight firearms (4 lbs. max). Classic buckle designs available, because no one needs to know you’re carrying.
    • Top Grain Leather with our proprietary Reinforced Power-Core™center for support & stiffness. Buckle styles differ but mechanism and function is the same.
    • Leather Gun Belts are 1.5" wide and One-Size to fit any waist size from 24” up to 44” (XL up to 54"). Belt is secured to buckle using large teeth clamp and 2 set screws with hex wrench (included).


    Kore Essentials offers a wide variety of heavy-duty ratcheting buckles (4.5 cm x 6 cm) designed to work with KE gun belts. Buckles are constructed of either high-grade, zinc alloy, with an electroplated gunmetal or black powder-coat finish, or solid stainless steel (all contain nickel). The buckle mechanism features our Kore designed and patented, spring-loaded system that's durable, reliable and won't stick.


    All gun buckles enlist the use of 2 set screws (M4 x 7 mm length), and a row of teeth, to securely hold the belts into the buckles. This upgraded system is extremely secure. An Allen wrench is included (2 mm).

    Gun Belts

    Kore EDC gun belts feature a 10” virtually indestructible, hidden track with 40+ size positions to adjust with. Now you can precisely adjust your gun belt in small 1/4” increments for a perfect fit. It's the ultimate concealed carry belt for work, play, the range, or even out on the town.


    All Kore Essentials gun belts (leather & tactical) feature our Proprietary Reinforced Power-Core™ center. This unique blend makes our belts sturdy and stiff enough to support your firearm and gear with out any sag, yet flexible enough to sit, walk, or move in all day. It's the most secure, comfortable gun belt you will ever wear.


    EDC Leather & Tactical Gun Belts
    are 1.5" wideand 5 mm thick, and designed for IWB, OWB and Appendix carry situations. EDC Belts come in regular sizes (24" to 54") and XL sizes to fit waist up to 72". Check sizes when ordering.


    Garrison Leather and Tactical Belts
    are 1.75" wide belts and designed for the range, excursions, training or law enforcement. Due to there width they are not ideal for IWB or Appendix. Garrison Belts come in one size that fits any waist from 24" up to 54". Check sizes when ordering.


    Leather
    gun belts are constructed using 2 full-length pieces of Full Grain Buffalo leather or Top Grain leather and designed to support loads up to a maximum of 6 lbs. for Full Grain and 4lbs. for Top Grain (that's total gear weight). These belts are not designed to serve as tactical or duty belts, but rather EDC belts for work, play, dress, casual and a night out on the town.

    Kore nylon web tactical belts are stiffer and more rigid than our leather gun belts, and intended to support heavier loads and more gear. Constructed using Nylon Web outer layer (rated to 500 lbs.), Reinforced Power-Core Center™ and Super-Fiber inner liner for added strength and durability. Tactical belts are designed to support holstered firearms or gear up to a maximum of 8 lbs. (total weight). Due to the stiffness of our tactical belts they include a Belt Keeper to keep the belt tip flush with your pants.

    NotGun buckles and belts are NOT interchangeable with any of our Classic Fashion buckles or belts. EDC Gun belts are wider and thicker than our fashion belts. If a particular belt color or style does not appear in the selection menu we may be temporarily sold ou Includes: X1 Style Gun Buckle & Black Top Grain Leather Reinforced Belt [hex wrench & set screws]

    Gun belts are ONE-SIZE and FIT ANY WAIST from 24” up to 44" [XL & Tactical belts up to 54"]
    Here’s how to trim your new belt for a perfect fit. It’s easy and only takes a minute to do.

    1 - On the back of the belt we printed a sizing ruler. Locate your pant size on the ruler - ADD 4 inches and CUT - using sharp, heavy-duty scissors.

    2 - For example, if your pant size is 32” – cut the belt at 36” mark. If your pant size is is close to the maximum – do NOT cut the belt. Proceed to step 3

    3 - Using the wrench that is included, loosen the screws on the back of the buckle.

    4 - Insert cut or blunt end of belt into buckle teeth and clamp down firmly. It’s OK to use force if needed (use tabletop for leverage) - the buckle won’t break.

    5 - Tighten the screws until they are flush with the buckle. You will get resistance.

    6 - Feed belt around your waist (L to R), thru buckle and the first belt loop. Pull until belt feels snug

    7 - Ideally, your belt tip should extend beyond the first belt loop by 2-3 inches. If your belt is too long – just remove the buckle and trim off one inch at a time until the desired length is achieved. Cut with Caution.

    • Best fitting, most comfortable EDC gun belt you’ll ever wear. Precise, secure fit provides a smooth, fast draw every time.
    • NO Belt Holes. Instead Kore concealed carry belts use a hidden track with 40+ sizing positions, to adjust ¼” at a time. It's 800% more adjustable vs. traditional gun belt with holes.
    • Designed to support small to medium weight firearms (4 lbs. max). Classic buckle designs available, because no one needs to know you’re carrying.
    • Top Grain Leather with our proprietary Reinforced Power-Core™center for support & stiffness. Buckle styles differ but mechanism and function is the same.
    • Leather Gun Belts are 1.5" wide and One-Size to fit any waist size from 24” up to 44” (XL up to 54"). Belt is secured to buckle using large teeth clamp and 2 set screws with hex wrench (included).


    Kore Essentials offers a wide variety of heavy-duty ratcheting buckles (4.5 cm x 6 cm) designed to work with KE gun belts. Buckles are constructed of either high-grade, zinc alloy, with an electroplated gunmetal or black powder-coat finish, or solid stainless steel (all contain nickel). The buckle mechanism features our Kore designed and patented, spring-loaded system that's durable, reliable and won't stick.


    All gun buckles enlist the use of 2 set screws (M4 x 7 mm length), and a row of teeth, to securely hold the belts into the buckles. This upgraded system is extremely secure. An Allen wrench is included (2 mm).

    Gun Belts

    Kore EDC gun belts feature a 10” virtually indestructible, hidden track with 40+ size positions to adjust with. Now you can precisely adjust your gun belt in small 1/4” increments for a perfect fit. It's the ultimate concealed carry belt for work, play, the range, or even out on the town.


    All Kore Essentials gun belts (leather & tactical) feature our Proprietary Reinforced Power-Core™ center. This unique blend makes our belts sturdy and stiff enough to support your firearm and gear with out any sag, yet flexible enough to sit, walk, or move in all day. It's the most secure, comfortable gun belt you will ever wear.


    EDC Leather & Tactical Gun Belts
    are 1.5" wideand 5 mm thick, and designed for IWB, OWB and Appendix carry situations. EDC Belts come in regular sizes (24" to 54") and XL sizes to fit waist up to 72". Check sizes when ordering.


    Garrison Leather and Tactical Belts
    are 1.75" wide belts and designed for the range, excursions, training or law enforcement. Due to there width they are not ideal for IWB or Appendix. Garrison Belts come in one size that fits any waist from 24" up to 54". Check sizes when ordering.


    Leather
    gun belts are constructed using 2 full-length pieces of Full Grain Buffalo leather or Top Grain leather and designed to support loads up to a maximum of 6 lbs. for Full Grain and 4lbs. for Top Grain (that's total gear weight). These belts are not designed to serve as tactical or duty belts, but rather EDC belts for work, play, dress, casual and a night out on the town.

    Kore nylon web tactical belts are stiffer and more rigid than our leather gun belts, and intended to support heavier loads and more gear. Constructed using Nylon Web outer layer (rated to 500 lbs.), Reinforced Power-Core Center™ and Super-Fiber inner liner for added strength and durability. Tactical belts are designed to support holstered firearms or gear up to a maximum of 8 lbs. (total weight). Due to the stiffness of our tactical belts they include a Belt Keeper to keep the belt tip flush with your pants.

    NotGun buckles and belts are NOT interchangeable with any of our Classic Fashion buckles or belts. EDC Gun belts are wider and thicker than our fashion belts. If a particular belt color or style does not appear in the selection menu we may be temporarily sold ou Includes: X1 Style Gun Buckle & Black Top Grain Leather Reinforced Belt [hex wrench & set screws]

    Gun belts are ONE-SIZE and FIT ANY WAIST from 24” up to 44" [XL & Tactical belts up to 54"]
    Here’s how to trim your new belt for a perfect fit. It’s easy and only takes a minute to do.

    1 - On the back of the belt we printed a sizing ruler. Locate your pant size on the ruler - ADD 4 inches and CUT - using sharp, heavy-duty scissors.

    2 - For example, if your pant size is 32” – cut the belt at 36” mark. If your pant size is is close to the maximum – do NOT cut the belt. Proceed to step 3

    3 - Using the wrench that is included, loosen the screws on the back of the buckle.

    4 - Insert cut or blunt end of belt into buckle teeth and clamp down firmly. It’s OK to use force if needed (use tabletop for leverage) - the buckle won’t break.

    5 - Tighten the screws until they are flush with the buckle. You will get resistance.

    6 - Feed belt around your waist (L to R), thru buckle and the first belt loop. Pull until belt feels snug

    7 - Ideally, your belt tip should extend beyond the first belt loop by 2-3 inches. If your belt is too long – just remove the buckle and trim off one inch at a time until the desired length is achieved. Cut with Caution.

    • Best fitting, most comfortable EDC gun belt you’ll ever wear. Precise, secure fit provides a smooth, fast draw every time.
    • NO Belt Holes. Instead Kore concealed carry belts use a hidden track with 40+ sizing positions, to adjust ¼” at a time. It's 800% more adjustable vs. traditional gun belt with holes.
    • Designed to support small to medium weight firearms (4 lbs. max). Classic buckle designs available, because no one needs to know you’re carrying.
    • Top Grain Leather with our proprietary Reinforced Power-Core™center for support & stiffness. Buckle styles differ but mechanism and function is the same.
    • Leather Gun Belts are 1.5" wide and One-Size to fit any waist size from 24” up to 44” (XL up to 54"). Belt is secured to buckle using large teeth clamp and 2 set screws with hex wrench (included).


    Kore Essentials offers a wide variety of heavy-duty ratcheting buckles (4.5 cm x 6 cm) designed to work with KE gun belts. Buckles are constructed of either high-grade, zinc alloy, with an electroplated gunmetal or black powder-coat finish, or solid stainless steel (all contain nickel). The buckle mechanism features our Kore designed and patented, spring-loaded system that's durable, reliable and won't stick.


    All gun buckles enlist the use of 2 set screws (M4 x 7 mm length), and a row of teeth, to securely hold the belts into the buckles. This upgraded system is extremely secure. An Allen wrench is included (2 mm).

    Gun Belts

    Kore EDC gun belts feature a 10” virtually indestructible, hidden track with 40+ size positions to adjust with. Now you can precisely adjust your gun belt in small 1/4” increments for a perfect fit. It's the ultimate concealed carry belt for work, play, the range, or even out on the town.


    All Kore Essentials gun belts (leather & tactical) feature our Proprietary Reinforced Power-Core™ center. This unique blend makes our belts sturdy and stiff enough to support your firearm and gear with out any sag, yet flexible enough to sit, walk, or move in all day. It's the most secure, comfortable gun belt you will ever wear.


    EDC Leather & Tactical Gun Belts
    are 1.5" wideand 5 mm thick, and designed for IWB, OWB and Appendix carry situations. EDC Belts come in regular sizes (24" to 54") and XL sizes to fit waist up to 72". Check sizes when ordering.


    Garrison Leather and Tactical Belts
    are 1.75" wide belts and designed for the range, excursions, training or law enforcement. Due to there width they are not ideal for IWB or Appendix. Garrison Belts come in one size that fits any waist from 24" up to 54". Check sizes when ordering.


    Leather
    gun belts are constructed using 2 full-length pieces of Full Grain Buffalo leather or Top Grain leather and designed to support loads up to a maximum of 6 lbs. for Full Grain and 4lbs. for Top Grain (that's total gear weight). These belts are not designed to serve as tactical or duty belts, but rather EDC belts for work, play, dress, casual and a night out on the town.

    Kore nylon web tactical belts are stiffer and more rigid than our leather gun belts, and intended to support heavier loads and more gear. Constructed using Nylon Web outer layer (rated to 500 lbs.), Reinforced Power-Core Center™ and Super-Fiber inner liner for added strength and durability. Tactical belts are designed to support holstered firearms or gear up to a maximum of 8 lbs. (total weight). Due to the stiffness of our tactical belts they include a Belt Keeper to keep the belt tip flush with your pants.

    NotGun buckles and belts are NOT interchangeable with any of our Classic Fashion buckles or belts. EDC Gun belts are wider and thicker than our fashion belts. If a particular belt color or style does not appear in the selection menu we may be temporarily sold ou Includes: X1 Style Gun Buckle & Black Top Grain Leather Reinforced Belt [hex wrench & set screws]

    Gun belts are ONE-SIZE and FIT ANY WAIST from 24” up to 44" [XL & Tactical belts up to 54"]
    Here’s how to trim your new belt for a perfect fit. It’s easy and only takes a minute to do.

    1 - On the back of the belt we printed a sizing ruler. Locate your pant size on the ruler - ADD 4 inches and CUT - using sharp, heavy-duty scissors.

    2 - For example, if your pant size is 32” – cut the belt at 36” mark. If your pant size is is close to the maximum – do NOT cut the belt. Proceed to step 3

    3 - Using the wrench that is included, loosen the screws on the back of the buckle.

    4 - Insert cut or blunt end of belt into buckle teeth and clamp down firmly. It’s OK to use force if needed (use tabletop for leverage) - the buckle won’t break.

    5 - Tighten the screws until they are flush with the buckle. You will get resistance.

    6 - Feed belt around your waist (L to R), thru buckle and the first belt loop. Pull until belt feels snug

    7 - Ideally, your belt tip should extend beyond the first belt loop by 2-3 inches. If your belt is too long – just remove the buckle and trim off one inch at a time until the desired length is achieved. Cut with Caution.
    Kore Essentials X1 Black Leather Gun Belt is now in Canada, Shop at Tetragon for all your Kore Essential belt needs. Kore Gun Belts (1.5” wide) feature Power-Core Reinforced Center, hidden Track 40+ micro size positions. Kore Essentials X1 Black Leather Gun Belt is now in Canada, Shop at Tetragon for all your Kore Essential belt needs. Kore Gun Belts (1.5” wide) feature Power-Core Reinforced Center, hidden Track 40+ micro size positions. 5.11 Tactical 1/4 Zip Job Shirt
    Kore Essentials MultiCam
    Our Price: $89.99

    Includes: Full Grain Buffalo Leather Gun Belt [1.5" wide / buckle not included]

    • Due to the nature of buffalo leather, expect small variances of color, as well as scratches and scuffs developing as you wear the belt. This is not a defect but a natural characteristic of this leather style. If you get an unwanted scratch, try rubbing it firmly with your fingers and the oils in the belt will help to lessen it. The more you wear it, the better it looks!
    • Designed to work with our Western and X-series Gun Buckles [1.5" wide].
    • Kore Western belts are constructed using 2 full-length pieces of Full Grain Buffalo Leather stitched together, with our reinforced, proprietary Power-Core™ center for added strength, stability and durability.
    • Hidden track sewn into the back of belt features 40+ size positions to adjust with in small 1/4" increments, for a perfect fit.
    • Built to support light to medium weight holstered firearms up to 6 lbs. Belts are One-Size and fit every waist size from 24" up to 44".
    Gun belts are ONE-SIZE and FIT ANY WAIST from 24” up to 44" [XL & Tactical belts up to 54"]
    Here’s how to trim your new belt for a perfect fit. It’s easy and only takes a minute to do.

    1 - On the back of the belt we printed a sizing ruler. Locate your pant size on the ruler - ADD 4 inches and CUT - using sharp, heavy-duty scissors.

    2 - For example, if your pant size is 32” – cut the belt at 36” mark. If your pant size is is close to the maximum – do NOT cut the belt. Proceed to step 3

    3 - Using the wrench that is included, loosen the screws on the back of the buckle.

    4 - Insert cut or blunt end of belt into buckle teeth and clamp down firmly. It’s OK to use force if needed (use tabletop for leverage) - the buckle won’t break.

    5 - Tighten the screws until they are flush with the buckle. You will get resistance.

    6 - Feed belt around your waist (L to R), thru buckle and the first belt loop. Pull until belt feels snug

    7 - Ideally, your belt tip should extend beyond the first belt loop by 2-3 inches. If your belt is too long – just remove the buckle and trim off one inch at a time until the desired length is achieved. Cut with Caution.

    • MultiCam® & Camo belts are constructed using high-quality, USA made materials. They are NOT quite as stiff or rigid as our tactical belts & Rated to support small to medium-size firearms, magazines and additional gear up to 6 lbs.
    • Best fitting, most durable Tactical Gun Belt you’ll ever own. Precise, secure fit provides a smooth, fast draw every time.
    • No Belt Holes. Instead Kore concealed carry belts use a hidden track with 40+ sizing positions, so you can adjust ¼” at a time.
    • Outer layer material is rated to 250 lbs., with reinforced, proprietary Power-Core™ center & super-fiber inner lining, to prevent roll-over and sagging. Gun belts are One-Size & fit any waist from 24” to 54” [1.5” wide].
    Gun belts are ONE-SIZE and FIT ANY WAIST from 24” up to 44" [XL & Tactical belts up to 54"]
    Here’s how to trim your new belt for a perfect fit. It’s easy and only takes a minute to do.

    1 - On the back of the belt we printed a sizing ruler. Locate your pant size on the ruler - ADD 4 inches and CUT - using sharp, heavy-duty scissors.

    2 - For example, if your pant size is 32” – cut the belt at 36” mark. If your pant size is is close to the maximum – do NOT cut the belt. Proceed to step 3

    3 - Using the wrench that is included, loosen the screws on the back of the buckle.

    4 - Insert cut or blunt end of belt into buckle teeth and clamp down firmly. It’s OK to use force if needed (use tabletop for leverage) - the buckle won’t break.

    5 - Tighten the screws until they are flush with the buckle. You will get resistance.

    6 - Feed belt around your waist (L to R), thru buckle and the first belt loop. Pull until belt feels snug

    7 - Ideally, your belt tip should extend beyond the first belt loop by 2-3 inches. If your belt is too long – just remove the buckle and trim off one inch at a time until the desired length is achieved. Cut with Caution.
    The 1/4 Zip Job Shirt was engineered with assistance and feedback from
    emergency services professionals from around the world, and is designed
    to provide superior versatility and utility while remaining tough,
    comfortable, and professional, our Job Shirt is crafted from 11.6 oz.
    poly/cotton fleece fabric for a perfect blend of all-weather warmth and
    breathability.
    Kore Essentials X3 Executive belt Kore Essentials Executive belt Canada Kore Essentials Executive belt

    • Includes: X Series Buckle, Executive Protection Black Leather/Scuba Hybrid Outer Gun Belt 1.5", Velcro Inner Belt, Tip Keeper, Hex Wrench & Set Screws

      FOR PROPER FUNCTIONALITY, IT IS NECESSARY TO USE THE KORE ESSENTIALS INNER BELT AS THIS IS A DUAL BELT SYSTEM.

      Introducing the Kore Essentials Executive Protection Belt Collection – the ultimate reinforced gun belt for specialty law enforcement personnel and private security assignments.

      Our innovative, patented dual-belt system (inner & outer belt) is micro adjustable and unlike any other executive protection belt. A hidden track sewn into the back of the belt lets you adjust the size and fit, in small ¼” increments, for a perfect fit every time. Keep in mind, that both the Kore inner liner belt AND outer belt must be worn together to achieve this effect.

      Handcrafted from premium materials, these specialty gun belts feature our proprietary, Reinforced Power-Core center, designed to support a concealed carry firearm and gear in style. Available in both 1.5" and 1.75" belt widths, they’re compatible with all Kore "X" Series buckles (1.5”) and “G” buckles (1.75”), so you can choose the buckle that best suits your needs.

      Whether you're an executive bodyguard, security professional or law enforcement officer, Kore Executive Protection Gun Belts are designed to be worn as a low-profile, fashionable accessory with a suit or dress pants, providing the professional appearance your job requires. Because we understand that when you carry a firearm every day for a living - adjustability, support and comfort are paramount.

      Kore Reinforced Every Day Carry belts are the most adjustable, supportive, comfortable belt you will ever wear. They provide a precise, secure fit - so you get a smooth, fast draw every time.

      Belt Width/Thickness

      1.5” / 5 mm

      Load Rating

      Up to 10 lbs / IWB, OWB or Appendix

      Size Range

      Fits 24”-48”

      Buckle Material / Finish

      Alloy / Gunmetal

      Buckle Size / Weight

      3.5” x 1.75” / 3-4 oz.

      Adjustable Track

      Provides over 40 - ¼” size positions

      Belt Reinforcement

      Power-Core™ Center for added stiffness & support. Virtually indestructible

      Belt Material

      Scuba Webbing & Leather Outer / Hook Inne

    • Includes: X Series Buckle, Executive Protection Black Leather/Scuba Hybrid Outer Gun Belt 1.5", Velcro Inner Belt, Tip Keeper, Hex Wrench & Set Screws

      FOR PROPER FUNCTIONALITY, IT IS NECESSARY TO USE THE KORE ESSENTIALS INNER BELT AS THIS IS A DUAL BELT SYSTEM.

      Introducing the Kore Essentials Executive Protection Belt Collection – the ultimate reinforced gun belt for specialty law enforcement personnel and private security assignments.

      Our innovative, patented dual-belt system (inner & outer belt) is micro adjustable and unlike any other executive protection belt. A hidden track sewn into the back of the belt lets you adjust the size and fit, in small ¼” increments, for a perfect fit every time. Keep in mind, that both the Kore inner liner belt AND outer belt must be worn together to achieve this effect.

      Handcrafted from premium materials, these specialty gun belts feature our proprietary, Reinforced Power-Core center, designed to support a concealed carry firearm and gear in style. Available in both 1.5" and 1.75" belt widths, they’re compatible with all Kore "X" Series buckles (1.5”) and “G” buckles (1.75”), so you can choose the buckle that best suits your needs.

      Whether you're an executive bodyguard, security professional or law enforcement officer, Kore Executive Protection Gun Belts are designed to be worn as a low-profile, fashionable accessory with a suit or dress pants, providing the professional appearance your job requires. Because we understand that when you carry a firearm every day for a living - adjustability, support and comfort are paramount.

      Kore Reinforced Every Day Carry belts are the most adjustable, supportive, comfortable belt you will ever wear. They provide a precise, secure fit - so you get a smooth, fast draw every time.

      Belt Width/Thickness

      1.5” / 5 mm

      Load Rating

      Up to 10 lbs / IWB, OWB or Appendix

      Size Range

      Fits 24”-48”

      Buckle Material / Finish

      Alloy / Gunmetal

      Buckle Size / Weight

      3.5” x 1.75” / 3-4 oz.

      Adjustable Track

      Provides over 40 - ¼” size positions

      Belt Reinforcement

      Power-Core™ Center for added stiffness & support. Virtually indestructible

      Belt Material

      Scuba Webbing & Leather Outer / Hook Inne

    • Includes: X Series Buckle, Executive Protection Black Leather/Scuba Hybrid Outer Gun Belt 1.5", Velcro Inner Belt, Tip Keeper, Hex Wrench & Set Screws

      FOR PROPER FUNCTIONALITY, IT IS NECESSARY TO USE THE KORE ESSENTIALS INNER BELT AS THIS IS A DUAL BELT SYSTEM.

      Introducing the Kore Essentials Executive Protection Belt Collection – the ultimate reinforced gun belt for specialty law enforcement personnel and private security assignments.

      Our innovative, patented dual-belt system (inner & outer belt) is micro adjustable and unlike any other executive protection belt. A hidden track sewn into the back of the belt lets you adjust the size and fit, in small ¼” increments, for a perfect fit every time. Keep in mind, that both the Kore inner liner belt AND outer belt must be worn together to achieve this effect.

      Handcrafted from premium materials, these specialty gun belts feature our proprietary, Reinforced Power-Core center, designed to support a concealed carry firearm and gear in style. Available in both 1.5" and 1.75" belt widths, they’re compatible with all Kore "X" Series buckles (1.5”) and “G” buckles (1.75”), so you can choose the buckle that best suits your needs.

      Whether you're an executive bodyguard, security professional or law enforcement officer, Kore Executive Protection Gun Belts are designed to be worn as a low-profile, fashionable accessory with a suit or dress pants, providing the professional appearance your job requires. Because we understand that when you carry a firearm every day for a living - adjustability, support and comfort are paramount.

      Kore Reinforced Every Day Carry belts are the most adjustable, supportive, comfortable belt you will ever wear. They provide a precise, secure fit - so you get a smooth, fast draw every time.

      Belt Width/Thickness

      1.5” / 5 mm

      Load Rating

      Up to 10 lbs / IWB, OWB or Appendix

      Size Range

      Fits 24”-48”

      Buckle Material / Finish

      Alloy / Gunmetal

      Buckle Size / Weight

      3.5” x 1.75” / 3-4 oz.

      Adjustable Track

      Provides over 40 - ¼” size positions

      Belt Reinforcement

      Power-Core™ Center for added stiffness & support. Virtually indestructible

      Belt Material

      Scuba Webbing & Leather Outer / Hook Inne

    Kore Essentials C1 COMPETITION BELT 1.5" Condor Summit Softshell Jacket Canada Kore Essentials Battle Belt Canada
    Kore Essentials Battle Belt Kit
    Our Price: $199.99

    (1)

    • Includes: C1 Buckle & Black Competition Belt (1.5"), Inner Velcro Liner Belt (1.5"), 1 Tip Keeper, Measuring Tape, Hex Wrench & Set Screws. This is a complete competition belt kit.

      Introducing the World's First Micro Adjustable Competition shooters belt. Kore speed belts use a hidden track with 20+ sizing points to adjust in small ¼” increments. Now you can tighten your rig as much as humanly possible, to hold your holster and gear rock solid. No more having to reposition Velcro to make an adjustment. Simply put, this is the best fitting, best built competition belt you’ll ever wear.

      Kore Essentials offers a wide variety of heavy-duty ratcheting buckles (4.5 cm x 6 cm) designed to work with our gun belts. Buckles are constructed of either high-grade, zinc alloy, with an electroplated gunmetal or black powder-coat finish, or solid stainless steel (all contain nickel). The buckle mechanism features our Kore designed and patented, spring-loaded system that's durable, reliable and won't stick.

      All gun buckles enlist the use of 2 set screws (M4 x 7 mm length), and a row of teeth, to securely hold the belts into the buckles. This upgraded system is extremely secure. A 2 mm Allen wrench is included with each gun buckle.

    Multiply colors available!

    • Includes: Black Battle Belt (1.75"), Black Battle Buckle, Inner Velcro Liner Belt (1.5")
    • Best fitting, most comfortable EDC gun belt you’ll ever wear. Precise, secure fit provides a smooth, fast draw every time.
    • NO Belt Holes. Instead Kore concealed carry belts use a hidden track with 40+ sizing positions, to adjust ¼” at a time. It's 800% more adjustable vs. traditional gun belt with holes.
    • Designed to support small to medium weight firearms (4 lbs. max). Classic buckle designs available, because no one needs to know you’re carrying.
    • Top Grain Leather with our proprietary Reinforced Power-Core™center for support & stiffness. Buckle styles differ but mechanism and function is the same.
    • Leather Gun Belts are 1.5" wide and One-Size to fit any waist size from 24” up to 44” (XL up to 54"). Belt is secured to buckle using large teeth clamp and 2 set screws with hex wrench (included).


    Kore Essentials offers a wide variety of heavy-duty ratcheting buckles (4.5 cm x 6 cm) designed to work with KE gun belts. Buckles are constructed of either high-grade, zinc alloy, with an electroplated gunmetal or black powder-coat finish, or solid stainless steel (all contain nickel). The buckle mechanism features our Kore designed and patented, spring-loaded system that's durable, reliable and won't stick.


    All gun buckles enlist the use of 2 set screws (M4 x 7 mm length), and a row of teeth, to securely hold the belts into the buckles. This upgraded system is extremely secure. An Allen wrench is included (2 mm).

    Gun Belts

    Kore EDC gun belts feature a 10” virtually indestructible, hidden track with 40+ size positions to adjust with. Now you can precisely adjust your gun belt in small 1/4” increments for a perfect fit. It's the ultimate concealed carry belt for work, play, the range, or even out on the town.


    All Kore Essentials gun belts (leather & tactical) feature our Proprietary Reinforced Power-Core™ center. This unique blend makes our belts sturdy and stiff enough to support your firearm and gear with out any sag, yet flexible enough to sit, walk, or move in all day. It's the most secure, comfortable gun belt you will ever wear.


    EDC Leather & Tactical Gun Belts
    are 1.5" wideand 5 mm thick, and designed for IWB, OWB and Appendix carry situations. EDC Belts come in regular sizes (24" to 54") and XL sizes to fit waist up to 72". Check sizes when ordering.


    Garrison Leather and Tactical Belts
    are 1.75" wide belts and designed for the range, excursions, training or law enforcement. Due to there width they are not ideal for IWB or Appendix. Garrison Belts come in one size that fits any waist from 24" up to 54". Check sizes when ordering.


    Leather
    gun belts are constructed using 2 full-length pieces of Full Grain Buffalo leather or Top Grain leather and designed to support loads up to a maximum of 6 lbs. for Full Grain and 4lbs. for Top Grain (that's total gear weight). These belts are not designed to serve as tactical or duty belts, but rather EDC belts for work, play, dress, casual and a night out on the town.

    Kore nylon web tactical belts are stiffer and more rigid than our leather gun belts, and intended to support heavier loads and more gear. Constructed using Nylon Web outer layer (rated to 500 lbs.), Reinforced Power-Core Center™ and Super-Fiber inner liner for added strength and durability. Tactical belts are designed to support holstered firearms or gear up to a maximum of 8 lbs. (total weight). Due to the stiffness of our tactical belts they include a Belt Keeper to keep the belt tip flush with your pants.

    NotGun buckles and belts are NOT interchangeable with any of our Classic Fashion buckles or belts. EDC Gun belts are wider and thicker than our fashion belts. If a particular belt color or style does not appear in the selection menu we may be temporarily sold ou Includes: X1 Style Gun Buckle & Black Top Grain Leather Reinforced Belt [hex wrench & set screws]

    Gun belts are ONE-SIZE and FIT ANY WAIST from 24” up to 44" [XL & Tactical belts up to 54"]
    Here’s how to trim your new belt for a perfect fit. It’s easy and only takes a minute to do.

    1 - On the back of the belt we printed a sizing ruler. Locate your pant size on the ruler - ADD 4 inches and CUT - using sharp, heavy-duty scissors.

    2 - For example, if your pant size is 32” – cut the belt at 36” mark. If your pant size is is close to the maximum – do NOT cut the belt. Proceed to step 3

    3 - Using the wrench that is included, loosen the screws on the back of the buckle.

    4 - Insert cut or blunt end of belt into buckle teeth and clamp down firmly. It’s OK to use force if needed (use tabletop for leverage) - the buckle won’t break.

    5 - Tighten the screws until they are flush with the buckle. You will get resistance.

    6 - Feed belt around your waist (L to R), thru buckle and the first belt loop. Pull until belt feels snug

    7 - Ideally, your belt tip should extend beyond the first belt loop by 2-3 inches. If your belt is too long – just remove the buckle and trim off one inch at a time until the desired length is achieved. Cut with Caution.
    Kore Essentials D1 Duty Belt 2.25" Professionals need the best when working in the worst weather and conditions that's why 5.11 Tactical made the best winter jacket the 5-IN-1 Jacket 2.0 - Tetragon your number one source for 5.11 Tactical in Canada The 5.11 tactical 3–in–1 Parka 2.0 The warm and breathable fleece liner, with improved lining, cuffs and added document pockets, doubles as a standalone five–pocket tactical jacket when removed. Ships from Canada
    5.11 Tactical 5-IN-1 Jacket 2.0
    Our Price: $399.99

    (1)
    5.11 Tactical 3-IN-1 Parka 2.0
    Our Price: $399.99

    (1)

    • Includes: D1 Duty Buckle, 2.25" Smooth Black Duty Belt, 1.5" Inner Velcro loop Belt, 1 Tip Keeper, Inner Belt Clip, Hex Wrench/Screws & Sizing Instructions.

      Introducing the World's First Micro Adjustable Duty Belt! It's the most comfortable, adjustable, supportive duty belt you will ever wear and real game changer for law enforcement officers, military personnel, and security

    Compromise is not an option when lives and safety are on the line.

    Professionals need the best when working in the worst weather and conditions.

    That's why 5.11 Tactical introduced the 5-in-1 Jacket 2.0. It's 8% lighter than its predecessor and much more flexible thanks to an outer shell of mechanical stretch polyester.

    The fully seam-sealed 10K waterproof and 10K breathable fabric with DWR provides Blood Borne Pathogen resistance.

    When it's pouring, cover up with the removable hood that can be rolled into the collar or stored in back pocket.

    A new Quixip® system on the sides offers enhanced ventilation and rapid firearm access.

    The two-piece setup's removable interior liner features zip-off sleeves and a side zipper to provide even more versatility.

    Tech fleece construction ensures years of service and, when coupled with the shock cord at the hem, keeps warmth in.

    Add a pair of document pockets on both layers, and you have the 5.11® answer to tough situations.

    • Outer Jacket: 100% polyester, hardshell, 2L plain weave w/mechanical stretch, 5.2-oz., DWR, BBP
    • Inner Jacket: 100% polyester tech fleece, 10.3-oz., anti-pilling
    • Inner jacket overlays: 100% nylon 6 plain weave, 3.7-oz., W/R
    • 10K/10K waterproof/breathable rating with Blood Borne Pathogen resistance
    • Fully seam sealed
    • Two-way center front zipper with external/internal storm flaps and chin guard
    • Hood rolls/stores into collar and is detachable with stash pocket at upper back body
    • Mic loops
    • Camera loop in kit
    • Left/right chest ReadyPocket™
    • Articulated sleeves with adjustable cuffs
    • Quixip® system at side seams
    • Front hand zipper pockets
    • Adjustable hem with front internal shock cord system/tunneled elastic back
    • Warm and breathable removable inner fleece jacket
    • 5 pockets outer jacket and 5 pockets inner jacket
    • EN 343 : 2019 certified, Class 4-3-X
    • Regular

    5.11 Tactical took the original 3–in–1 Parka and re–engineered it to perform even better.

    The 3–in–1 Parka 2.0 offers mechanical stretch for improved flexibility in the field and it’s now 13% lighter. Upgraded with an improved 10K waterproof and 10K breathable fabric with DWR, the 3–in–1 Parka 2.0 provides Blood Borne Pathogen resistance*.

    The six-pocket outer shell features mic loops, camera loop kit, hood that can be rolled into the collar or detached and stored in back pocket, hidden utility pockets and pull out ID panels for easy on duty identification. A 5.11® ReadyPocket™ on both the left and right chest stores your phone, sunglasses or extra magazines.

    We added a new Quixip® system on the sides for rapid firearm access and enhanced ventilation.

    The warm and breathable fleece liner, with improved lining, cuffs and added document pockets, doubles as a standalone five–pocket tactical jacket when removed.

    You’ll be ready for any cold–weather mission with the 5.11 Tactical 3–in–1 Parka 2.0.



    • Outer Jacket: 100% polyester, hardshell, 2L plain weave with mechanical stretch, 5.2–oz., DWR, BBP
    • Inner Jacket: 100% polyester tech fleece, 10.3–oz., anti–pilling
    • Inner jacket overlays: 100% nylon 6 plain weave, 3.7–oz., Water Resistant
    • 10K/10K waterproof/breathable rating with Blood Borne Pathogen resistance*
    • Fully seam sealed
    • Two–way center front zipper with external/internal storm flaps and chin guard
    • Buttonhole on internal storm flap for cord management
    • Hood rolls/stores into collar and is detachable with stash pocket at upper back body
    • Mic loops
    • Camera loop in kit
    • Removable pull out panels at left/right chest and upper back body
    • Left/right chest ReadyPocket™
    • Articulated sleeves with adjustable cuffs
    • Quixip® system at side seams
    • Back body comms access welts
    • Hand zipper pockets
    • Adjustable hem with internal shock cord system
    • Warm and breathable removable inner fleece jacket
    • 6 pockets outer jacket and 5 pockets inner jacket
    • EN 343 : 2019 certified, Class 4-3-X
    • Regular fit